vohk Posted October 10, 2022 Share Posted October 10, 2022 (edited) waiting up to 30 sec for device with label UNRAID to come online ... xhci_hcd 0000 :00 :10.1: Error while assigning device slot ID xhci_hdc 0000 :00 :101.: Max number of devices this xHCI host supports is 32. usb usb8-port1: couldn't allocate usb_device not found - press ENTER key to reboot ... After updating UNRAID through the web interface, both with 6.11.0 and 6.11.1, the system fails to boot with the above message. No hardware has been changed and the system was running and booting fine on 6.10.3 previously. I was able successfully flash a 6.10.3 backup after this occurred with 6.11.0. Any suggestions on where to start troubleshooting would be appreciated. I didn't notice any relevant logs but I have a full copy of the flash drive archived. edit1: Testing with a clean 6.11.1 USB (all default settings) results in the same error, so it seems to be an issue with 6.11.1 and my hardware rather than my existing configuration. edit2: system specs: AMD A8-7600 Radeon R7 ASRock FM2A88X-ITX+ Edited October 10, 2022 by vohk Quote Link to comment
JorgeB Posted October 10, 2022 Share Posted October 10, 2022 Try a different USB port (ideally in a different controller), also make sure it's a USB 2.0 port if available. Quote Link to comment
vohk Posted October 10, 2022 Author Share Posted October 10, 2022 12 minutes ago, JorgeB said: Try a different USB port (ideally in a different controller), also make sure it's a USB 2.0 port if available. Good thought- I've tried 3, 1x3.0 and 2x2.0 ports- same error, only different usb/port number listed. And I am certain all 3 ports are fully functional, with previous versions of UNRAID and other OSs. Quote Link to comment
Solution JorgeB Posted October 10, 2022 Solution Share Posted October 10, 2022 That to me it suggests some kernel compatibly issue with your board, I would wait for a newer release with a newer kernel and try again. Quote Link to comment
vohk Posted October 10, 2022 Author Share Posted October 10, 2022 That would make sense. The board is getting pretty ancient. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.