BTFS Errors on New Configuration

[TurboStreetCar]

Hello, i received a notification that one of my cache drives cant be written to, so i checked the system log and see alot of BTRFS errors. 

I also have a duplicate drive in unassigned devices. I have a 60GB drive just for plex metadata.

Currently, that drive is active, and accessible, all seems fine, But i have the same drive with serial number and all, listed in unassigned devices. 

System diagnostics attached. 

All the drives in this system were being used with an older MB/CPU, recently upgraded the MB/CPU to a Asrock Pro RS/i3 12100. Also upgraded power supply from old OEM from a used computer to a EVGA 650W. 

Seems like it all started with this: 

Oct 10 06:02:33 Backup kernel: ata5.00: exception Emask 0x10 SAct 0x20000000 SErr 0x400100 action 0x6 frozen
Oct 10 06:02:33 Backup kernel: ata5.00: irq_stat 0x08000000, interface fatal error
Oct 10 06:02:33 Backup kernel: ata5: SError: { UnrecovData Handshk }
Oct 10 06:02:33 Backup kernel: ata5.00: failed command: WRITE FPDMA QUEUED
Oct 10 06:02:33 Backup kernel: ata5.00: cmd 61/20:e8:60:6b:72/05:00:00:00:00/40 tag 29 ncq dma 671744 out
Oct 10 06:02:33 Backup kernel:         res 50/00:00:00:00:00/00:00:00:00:00/00 Emask 0x10 (ATA bus error)
Oct 10 06:02:33 Backup kernel: ata5.00: status: { DRDY }
Oct 10 06:02:33 Backup kernel: ata5: hard resetting link
Oct 10 06:02:33 Backup kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 10 06:02:33 Backup kernel: ata5.00: configured for UDMA/133
Oct 10 06:02:33 Backup kernel: ata5: EH complete

And then turned into this, with the last BRTFS Error just continuing to count up in the "rd" field: 

Oct 10 06:02:56 Backup kernel: ata5: SATA link down (SStatus 0 SControl 310)
Oct 10 06:02:56 Backup kernel: ata5.00: disable device
Oct 10 06:02:56 Backup kernel: sd 5:0:0:0: [sdb] tag#13 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=DRIVER_OK cmd_age=23s
Oct 10 06:02:56 Backup kernel: sd 5:0:0:0: [sdb] tag#13 Sense Key : 0x2 [current] 
Oct 10 06:02:56 Backup kernel: sd 5:0:0:0: [sdb] tag#13 ASC=0x4 ASCQ=0x21 
Oct 10 06:02:56 Backup kernel: sd 5:0:0:0: [sdb] tag#13 CDB: opcode=0x2a 2a 00 00 72 6b 60 00 05 20 00
Oct 10 06:02:56 Backup kernel: I/O error, dev sdb, sector 7498592 op 0x1:(WRITE) flags 0x1800 phys_seg 164 prio class 0
Oct 10 06:02:56 Backup kernel: BTRFS error (device sdb1): bdev /dev/sdb1 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0
Oct 10 06:02:56 Backup kernel: BTRFS: error (device sdb1) in btrfs_commit_transaction:2418: errno=-5 IO failure (Error while writing out transaction)
Oct 10 06:02:56 Backup kernel: ata5: EH complete
Oct 10 06:02:56 Backup kernel: BTRFS info (device sdb1: state E): forced readonly
Oct 10 06:02:56 Backup kernel: BTRFS warning (device sdb1: state E): Skipping commit of aborted transaction.
Oct 10 06:02:56 Backup kernel: BTRFS: error (device sdb1: state EA) in cleanup_transaction:1982: errno=-5 IO failure
Oct 10 06:02:56 Backup kernel: sd 5:0:0:0: rejecting I/O to offline device
Oct 10 06:02:56 Backup kernel: ata5.00: detaching (SCSI 5:0:0:0)
Oct 10 06:02:56 Backup kernel: sd 5:0:0:0: [sdb] Synchronizing SCSI cache
Oct 10 06:02:57 Backup kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 10 06:02:57 Backup kernel: ata5.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
Oct 10 06:02:57 Backup kernel: ata5.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32)
Oct 10 06:02:57 Backup kernel: ata5.00: configured for UDMA/133
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sdb] Stopping disk
Oct 10 06:02:57 Backup kernel: scsi 5:0:0:0: Direct-Access     ATA      SanDisk SDSSDP06 0    PQ: 0 ANSI: 5
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sde] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sde] Write Protect is off
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sde] Preferred minimum I/O size 512 bytes
Oct 10 06:02:57 Backup kernel: sde: sde1
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sde] Attached SCSI disk
Oct 10 06:02:59 Backup kernel: BTRFS warning: duplicate device /dev/sde1 devid 1 generation 1932543 scanned by udevd (17894)
Oct 10 06:02:59 Backup unassigned.devices: Disk with ID 'SanDisk_SDSSDP064G_133116400085 (sde)' is not set to auto mount.
Oct 10 06:08:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 1, flush 0, corrupt 0, gen 0
Oct 10 06:08:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 2, flush 0, corrupt 0, gen 0
Oct 10 06:08:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 3, flush 0, corrupt 0, gen 0
Oct 10 06:08:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 4, flush 0, corrupt 0, gen 0
Oct 10 06:08:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 5, flush 0, corrupt 0, gen 0
Oct 10 06:08:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 6, flush 0, corrupt 0, gen 0
Oct 10 06:08:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 7, flush 0, corrupt 0, gen 0
Oct 10 06:08:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 8, flush 0, corrupt 0, gen 0
Oct 10 06:13:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 9, flush 0, corrupt 0, gen 0
Oct 10 06:13:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 10, flush 0, corrupt 0, gen 0
Oct 10 06:13:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 11, flush 0, corrupt 0, gen 0
Oct 10 06:13:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 12, flush 0, corrupt 0, gen 0
Oct 10 06:13:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 13, flush 0, corrupt 0, gen 0
Oct 10 06:13:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 14, flush 0, corrupt 0, gen 0
Oct 10 06:13:04 Backup kernel: BTRFS error (device sdb1: state EA): bdev /dev/sdb1 errs: wr 1, rd 15, flush 0, corrupt 0, gen 0

 

backup-diagnostics-20221016-0822.zip

[JorgeB]

4 minutes ago, TurboStreetCar said:

Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sdb] Stopping disk
Oct 10 06:02:57 Backup kernel: scsi 5:0:0:0: Direct-Access     ATA      SanDisk SDSSDP06 0    PQ: 0 ANSI: 5
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sde] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sde] Write Protect is off
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 10 06:02:57 Backup kernel: sd 5:0:0:0: [sde] Preferred minimum I/O size 512 bytes

Device dropped offline and reconnected with a different identifier, check/replace cables. then see here for better pool monitoring.

[TurboStreetCar]

@JorgeB So it seems that drive is unwritable currently. After i replace the cables, how do i remove the duplicate drive, and make the drive writable?

[TurboStreetCar]

@JorgeB OK Replaced the SATA cable, and the duplicate drive moved to historical devices after the shutdown/power up.

It appears to be working currently. Interesting if the cable failed. Is that something common?

[JorgeB]

19 hours ago, TurboStreetCar said:

Is that something common?

Connection problems are more common than devices failing.

[TurboStreetCar]

@JorgeB Interesting, Appreciate the help, its been up and running for a while now with no further issues.

Thanks!