Grobalt Posted October 25, 2022 Share Posted October 25, 2022 I posted this in the german board, but i have to ask here after a few days: in short - i created a share, mounted this share from another computer (or for test reason via nfs local) and it shows the content of another share. I did this with 2 shares and it was reproducable -> showing the content of 2 old shares. totally crazy and i have no clue. The new shares are "ron" and "scraping" -> ron is showing the content of "aufnahmen" and scraping is showing the content of "download" Quote Link to comment
dlandon Posted October 25, 2022 Share Posted October 25, 2022 Post your diagnostics zip file. Quote Link to comment
Grobalt Posted October 25, 2022 Author Share Posted October 25, 2022 unraid-diagnostics-20221025-2145.zip Quote Link to comment
Solution itimpi Posted October 25, 2022 Solution Share Posted October 25, 2022 I am not an expert on this, but should the exports not have a unique value for the -fsid option for each share? The ones that you are saying are going wrong are where they have the same fsid value as another entry. 1 Quote Link to comment
Grobalt Posted October 25, 2022 Author Share Posted October 25, 2022 37 minutes ago, itimpi said: I am not an expert on this, but should the exports not have a unique value for the -fsid option for each share? The ones that you are saying are going wrong are where they have the same fsid value as another entry. where can i see this and how to change ? in the gui for share i dont see any fsid to set Quote Link to comment
dlandon Posted October 25, 2022 Share Posted October 25, 2022 You can't control the fsid. Unraid takes care of it for you. Have you tried a reboot? Post the /etc/exports file content after a reboot. You may have run into a bug. I'll do some testing and see if there is a problem. 1 Quote Link to comment
Grobalt Posted October 25, 2022 Author Share Posted October 25, 2022 root@unraid:/etc# cat exports # See exports(5) for a description. # This file contains a list of all directories exported to other computers. # It is used by rpc.nfsd and rpc.mountd. "/mnt/user/aufnahmen" -fsid=100,async,no_subtree_check "/mnt/user/download" -fsid=101,async,no_subtree_check "/mnt/user/filme" -fsid=102,async,no_subtree_check *(ro,sec=sys,insecure,anongid =100,anonuid=99,all_squash) "/mnt/user/ron" -fsid=102,async,no_subtree_check *(ro,sec=sys,insecure,anongid=1 00,anonuid=99,all_squash) "/mnt/user/serien" -fsid=103,async,no_subtree_check *(ro,sec=sys,insecure,anongi d=100,anonuid=99,all_squash) reboot did not help, still duplicate fsid Quote Link to comment
dlandon Posted October 25, 2022 Share Posted October 25, 2022 Edit the the duplicated share "ron" /flash/config.shares/ folder and change the duplicate to the next in the sequence for fsids. i.e. change ron to fsid 104. I don't know how you got duplicates. Can you take your flash drive to a PC and check the file system in case you have a flash issue? Edit: You'll have to reboot or stop and restart the array. Quote Link to comment
Grobalt Posted October 25, 2022 Author Share Posted October 25, 2022 I did edit before reboot to 104, but after reboot it was the old fsid. Let me do again to validate after some hours of sleep thank you Quote Link to comment
dlandon Posted October 25, 2022 Share Posted October 25, 2022 Try changing the filme share. Quote Link to comment
Grobalt Posted October 26, 2022 Author Share Posted October 26, 2022 i edited /boot/config/shares/ron.cfg to fsid 104 and restarted the array - seem to work. but then i created another new share, just for test purpose, enabled nfs export -> id received again a duplicate, already used fsid ! Quote Link to comment
dlandon Posted October 26, 2022 Share Posted October 26, 2022 I would turn off export on each of your shares and then turn them on one at a time and see if the fsid duplicates again as you re-assign them. Quote Link to comment
Grobalt Posted October 26, 2022 Author Share Posted October 26, 2022 now it messed up the system rights ... shares with the same name as an old share have the old fsid when recreated -> duplicate so i used new names, but the new shares are not listed under users, i cannot set the rights for them Quote Link to comment
dlandon Posted October 26, 2022 Share Posted October 26, 2022 Can you show a screen shot? Quote Link to comment
Grobalt Posted October 26, 2022 Author Share Posted October 26, 2022 sure, thanks ! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.