Zandor300 Posted November 6, 2022 Share Posted November 6, 2022 (edited) Hi, I replaced a non-parity 1TB disk in my server with a 4TB one (Disk 2 in diagnostics). Now the disk is showing up as "Unmountable: Unsupported partition layout". When I remove the disk from the array and leave the Disk 2 slot empty and start the array, all the data is there, but when I add the disk again and start the array, none of the data that is supposed to be on Disk 2 shows up. (Parity data should be valid with previous drive since parity check finished 6 days ago with 0 errors) I've already let the data rebuild happen twice now and after the data rebuild is done, still none of the data shows up. I've just replaced the sata cable to the new disk (since it was under slight tention before), with a brand new cable and also used a different sata port on motherboard but that didn't make a difference. Before all of this went down, I upgraded Unraid from version 6.9.2 directly to 6.11.2. I do have a backup from the flashdrive right before I did that. The server is running an GitLab instance. I do not have a full proper backup. I still have the previous drive and none of the data regarding GitLab has been changed since replacing the drive, so grabbing data from the previous drive and manually adding it back could be an option? I am uncertain what to do next. Screenshots With Disk 2 assigned Without Disk 2 assigned with_disk2_neon-diagnostics-20221106-1419.zip without_disk2_neon-diagnostics-20221106-1420.zip Edited November 6, 2022 by Zandor300 Quote Link to comment
Solution JorgeB Posted November 6, 2022 Solution Share Posted November 6, 2022 It's a bug with the latest release, for now suggest downgrading to v6.11.1 to partition the disk, you can then upgrade back if you want. Quote Link to comment
Zandor300 Posted November 6, 2022 Author Share Posted November 6, 2022 @JorgeB How do I downgrade to 6.11.1? Update OS tool only shows previous OS as 6.9.2 since that is what I upgraded from. Quote Link to comment
JorgeB Posted November 6, 2022 Share Posted November 6, 2022 Downgrading to v6.9.2 will also work, but you can download the v6.11.1 zip and extract all the bz* files to the flash drive replacing existing ones, then reboot. Quote Link to comment
Zandor300 Posted November 6, 2022 Author Share Posted November 6, 2022 I simply downgraded back to 6.9.2 and everything seems to be back to normal. Data rebuilding to Disk 2 as we speak while data is available and GitLab has started. @JorgeB Thank you for you insights! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.