RoryIsNotACabbage Posted November 26, 2022 Share Posted November 26, 2022 (edited) Any 6.11 version I have tried to update to has resulted in the same strange crashes happening within a couple minutes of the array being started. Downgrading to 6.10.3 completely fixes this error I am currently running the system without starting the array to confirm it only happens when it is started, I'll update here if that changes. I've also attached my system diagnostics. I'm not entirely sure where I can get a log file in unraid so if that would help please let me know where to look The usual sequence of events is as follows. Unraid starts Array starts Everything appears normal, low cpu usage, docker containers all start as expected. everything is accessible where it should be accessible. Crash, no warning, no error printed to the screen press the power button again, lights come on, fan spins up. nothing else happens. No video out whatsoever, and no response to ping force off the system. press the power, back to step 1 Any help at all would be appreciated Edit: It's worth noting that this remains the same when docker and VMs are both disabled jackdaw-diagnostics-20221126-1404.zip Edited November 26, 2022 by RoryIsNotACabbage Quote Link to comment
JorgeB Posted November 26, 2022 Share Posted November 26, 2022 If there's nothing on screen probably it won't help but you can still try to enable the syslog server to see if it catches something. Also make sure that you are using the correct power supply idle control setting, and there are some reports that a kernel change might change things, including some cases where it was needed to fully disable C-States to gain back stability. Quote Link to comment
RoryIsNotACabbage Posted November 26, 2022 Author Share Posted November 26, 2022 Thanks for the response. I've enabled syslog (although I have memory of looking at this before and getting nothing but maybe someone else will see something I didn't) I'll check the idle control next reboot, this is something I've just learned about today, up until now unraid has always "just worked" Quote Link to comment
RoryIsNotACabbage Posted November 26, 2022 Author Share Posted November 26, 2022 (edited) @JorgeBHere's my syslog if you can see anything. I'm not even entirely sure what is what here, everytime I think I've made sense of it I realise the times don't match up. Note I started mirroring before I re-upgraded the system. And I've changed IPs to x.x.x, not that that really makes it more securesyslog Edited November 26, 2022 by RoryIsNotACabbage Quote Link to comment
RoryIsNotACabbage Posted November 26, 2022 Author Share Posted November 26, 2022 I've done both the suggestions about idle and c states and no change. For just now I'm gonna have to downgrade again. Quote Link to comment
Solution JorgeB Posted November 27, 2022 Solution Share Posted November 27, 2022 Try booting in safe mode to rule out any plugin issues but it could be a compatibility issue between your hardware and the newer kernel. Quote Link to comment
RoryIsNotACabbage Posted December 12, 2022 Author Share Posted December 12, 2022 On 11/27/2022 at 10:09 AM, JorgeB said: Try booting in safe mode to rule out any plugin issues but it could be a compatibility issue between your hardware and the newer kernel. Apologies for taking so long to mark this solved, I was pre-clearing a drive and then I honestly just forgot for a while. I've now run it a solid couple days in safe mode and it was good, so I removed every plugin (That really sucked) and it now runs fine unsafe. So now we slowly add things back and keep our fingers crossed. Thanks for your help on this 1 Quote Link to comment
AmdWDred Posted December 16, 2022 Share Posted December 16, 2022 Did you find out which plugin it was? Mine is doing the same thing. The GUI just said I had a corrupted flash drive and I was just going to buy a new one until I decided to check the forums and saw your post. Quote Link to comment
RoryIsNotACabbage Posted December 31, 2022 Author Share Posted December 31, 2022 I never found out which one, I've been adding them back very slowly cause I've not spent as much time recently in the same location as my server is. I never had an issue with the flash drive though, just an errorless blackscreen Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.