socbutter Posted December 19, 2022 Share Posted December 19, 2022 (edited) I built a New UNRAID server with 10Gbe NIC (SAS9207-8i in IT Mode) and added another 10Gbe NIC (SAS9207-8i in IT Mode) to the Old server. I transferred via rsync (rsync -avh "/mnt/remotes/10.10.20.125_Films/" "/mnt/user/data/media/movies") for 48 hours (server cpu, mobo got hot). I checked before heading to bed noticed both 10Gbe NICs were down. Tried rebooting with both NICs were still down after the reboot. then I did something stupid I then changed the adapter setting for eth1 (10Gbe NIC) to eth0 so UNRAID uses it in the new server. Left old server unchanged. Rebooted UNRAID successfully but I am unable to access the NEW server GUI, via Chrome, from my windows PC ( PC does not have a 10Gbe NIC)! I am on the command line in the new server but I don't know what to do. I ran "DIAGNOSTICS FROM THE COMMAND LINE" unfortunately after rebooting. Please, I need help accessing my new server and resolving the 10Gbe NIC down issue on both servers. titan-diagnostics-20221219-1047.zip Edited December 19, 2022 by socbuter Quote Link to comment
Solution JorgeB Posted December 19, 2022 Solution Share Posted December 19, 2022 Delete/rename /boot/config/network.cfg and network-rules.cfg and reboot, settings will go back to default, which is a bond with all NICs and DHCP. Quote Link to comment
socbutter Posted December 19, 2022 Author Share Posted December 19, 2022 Thank you, your suggestion and editing of the network-rules.cfg (NAME="eth0" and NAME="eth1") enable me to boot TITAN and made the 10Gbe NIC operative. I still have a problem with server TOWER, message displayed is " Interface Ethernet Port 1 is down. Check Cable" Cables are attached to the NICS. the 10Gbe NIC is inoperative the Should I do the same as above?? Quote Link to comment
socbutter Posted December 20, 2022 Author Share Posted December 20, 2022 NVM your solution is the way to go. thank you ! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.