Hello guys, i just want to know, is Raw read error rate a problem?

 

After ask seagate for RMA, they send me another 8 TB disc, that i swapped last night for parity, when i wake up this morning i checked the smart status on that disk and check a lots of bad values... see attached printscreen.

 

This is not normal right?

 

After see this i swapped for my another ironwolf 4 TB old parity, and i checked lots of bad values too. i also attached the printscreen.

 

i will think about change all my seagate disks for another brand, i cant trust it anymore...

 

Thanks in advance!

 

 

 

Edited December 23, 20223 yr by Ronan C

https://www.partitionwizard.com/disk-recovery/raw-read-error-rate.html

https://forums.unraid.net/topic/86337-are-my-smart-reports-bad/?do=findComment&comment=800888

 

You are amazing Jorge, thanks!

 

So, will be great that unraid crew adjust the SMART tests or unraid web gui to show the correct informations about seagate drives, filtering this raw results and showing just the important part.