January 12, 20233 yr Author Another day another problem. Just mounted the new ASM1166 (with freshly upgraded FW) card i got. Started the unRaid, everthing look fine. Started the Array and disk6 (that one i freshly rebuilded the last time got red). Also got an warning regarding the UDMA CRC Error Count of that disk. I now shutdown the unRaid, change all the cables from the HDD cage to the card. The smart test on disk 6 ran fine. So what do i have to do now to see if it only was a cabling problem? Hope i dont have to rebuild the Disk again. htms-diagnostics-20230112-1056.zip Edited January 12, 20233 yr by darkside40
January 12, 20233 yr Community Expert Start the array, if the emulated disk6 mounts and contents look correct we usually recommend rebuilding, other option would be a new config and a correcting parity check after, it will take the same time.
January 12, 20233 yr Author Okay mounts, disk stays red. Looked at the files via ssh and played couple of them and they seem okay. But got another UDMA warning for that disk. So whats next?
January 12, 20233 yr Community Expert https://wiki.unraid.net/Manual/Storage_Management#Rebuilding_a_drive_onto_itself
January 12, 20233 yr Author Nope directly kicks the disk out again. UDMA CRC Error I think i have simply no luck using this ASM1166 Cards. Edited January 12, 20233 yr by darkside40
January 12, 20233 yr Author Mounted the old controller now the Disk is rebuild. I dont know seems the Gigabyte B460M D3H dows not play well with these ASM1166 Controllers.
January 12, 20233 yr Author I think for now i give up searching for a Backup controller. Dont know weather i buy another AAR1430SA and keep it as backup or if i try with the JMB585 in a couple of months.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.