kaine1688 Posted January 8, 2023 Share Posted January 8, 2023 (edited) unwejaton-diagnostics-20230108-0848.zipCan anyone look through the log and figure out why the server is becoming unresponsive, this has happened 2 times already this week? I am not sure what is happening. This server has a ZFS pool. When it hangs i can not SSH into server or anything, it just completely locks up. Only a reboot solves the issue. I think CA backup is causing it, lastnights backup is only 11GB vs usual 360GB. So i have the backup pointed to a ZFS share, is that bad? i only have a 512GB SSD in array since i mainly use this server as nextcloud/steam library/game servers on the ZFS pool. I could chuck a spinner in the array and just use it as the backup drive....... Edited January 8, 2023 by kaine1688 Quote Link to comment
JorgeB Posted January 9, 2023 Share Posted January 9, 2023 Enable the syslog server and post that after a crash. Quote Link to comment
itimpi Posted January 25, 2023 Share Posted January 25, 2023 18 minutes ago, kaine1688 said: I enabled it, but there is no log being generated? and a crash happened today Looks like you missed the last step where you enter the IP address of your Unraid server into the Remote Server field so that the server logs to itself An alternative is to use the option to mirror to flash but this is often not desirable if you want to minimise writes to the flash drive. Quote Link to comment
kaine1688 Posted January 25, 2023 Author Share Posted January 25, 2023 Ya i saw my mistake :X enabled it now and its working Quote Link to comment
kaine1688 Posted January 29, 2023 Author Share Posted January 29, 2023 It happened again yesterday but i just IPMI reset the server, and same thing today. syslog-192.168.1.12.log It seems to happen when i am streaming plex, pause and walk away for extended periods of time, with whatever i am watching paused. Or atleast it seems. The GUI becomes unresponsive and i am unable to SSH into the server. Quote Link to comment
JorgeB Posted January 29, 2023 Share Posted January 29, 2023 Jan 27 02:03:50 unRaidPlex kernel: macvlan_broadcast+0x10a/0x150 [macvlan] Jan 27 02:03:50 unRaidPlex kernel: macvlan_process_broadcast+0xbc/0x12f [macvlan] Macvlan call traces are usually the result of having dockers with a custom IP address and will end up crashing the server, upgrading to v6.10 or later and switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)) Quote Link to comment
kaine1688 Posted January 29, 2023 Author Share Posted January 29, 2023 10 hours ago, JorgeB said: Jan 27 02:03:50 unRaidPlex kernel: macvlan_broadcast+0x10a/0x150 [macvlan] Jan 27 02:03:50 unRaidPlex kernel: macvlan_process_broadcast+0xbc/0x12f [macvlan] Macvlan call traces are usually the result of having dockers with a custom IP address and will end up crashing the server, upgrading to v6.10 or later and switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)) Sounds good, both servers are on 6.11.5, swapped them both. Will circle back if i see similar happens again. Thanks Thought maybe after stuffing 10gig nics in both server something was wrong with them, but then again i did only see this issue after i upgraded from 6.8 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.