DaneeL Posted January 16, 2023 Share Posted January 16, 2023 Hi All, I installed Unraid on an older USB to try it out. It works great and I'm planning to buy a license so I purchased a new USB stick for it (2 actually). My problem is that my HP Microserver Gen8 (with latest BIOS) simply won't boot Unraid using these new drives. Interestingly when I install anything other than Unraid (e.g. Ventoy) on these drives I can boot without an issue. Is there anything I can change on the USB drives so I can boot Unraid? (The BIOS has very limited USB settings and I've tried all of them without any luck) Thanks! Quote Link to comment
itimpi Posted January 16, 2023 Share Posted January 16, 2023 Are you trying to boot using legacy (CSM) boot or UEFI boot? For UEFI boot you need to ensure the EFI folder on the flash drive has no trailing ~ (tilde) character. Quote Link to comment
DaneeL Posted January 16, 2023 Author Share Posted January 16, 2023 I'm trying with UEFI. The old USB key boots in UEFI. The new ones can't, neither in UEFI or in legacy. I forgot the mention the old drive is 16Gb the new ones are 32Gb. Quote Link to comment
Solution JonathanM Posted January 16, 2023 Solution Share Posted January 16, 2023 Try reformatting the new USB sticks with RUFUS, then follow the normal install instructions. Quote Link to comment
DaneeL Posted January 16, 2023 Author Share Posted January 16, 2023 Thank you! I managed to boot from one of the problematic USB keys. In case someone else is facing similar issues my solution was: - Format the USB stick with Rufus - as Suggested by @JonathanM (I used the settings shown in the attached screenshot) - I took backup of my current, working USB drive (Using the Unraid WebUI: Main -> Flash -> Flash backup) - I copied the files from the backup zip file onto the new drive without overwriting anything on the new drive (there were some file generated by Rufus after the format) Thanks again for the help! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.