CRC Error just poped up ...

[SiRMarlon]

So I got a pop up today of a CRC Error count, the count was a very low 2 I've had this drive in there for about a year with no issues. In the past I had an issue with another drive and it ended up being the SATA connector, but with the fact that this only showed 2 errors I am not sure if I should be worried or be doing something??  What do you guys think?? 

 

 

Got another error warning so I checked the log 

 

Quote

ATA Error Count: 3
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3 occurred at disk power-on lifetime: 12961 hours (540 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 20 79 df 40 00  11d+15:30:11.541  READ FPDMA QUEUED
  60 40 48 c0 8d df 40 00  11d+15:30:11.539  READ FPDMA QUEUED
  60 40 40 80 8b df 40 00  11d+15:30:11.539  READ FPDMA QUEUED
  60 c0 38 c0 89 df 40 00  11d+15:30:11.539  READ FPDMA QUEUED
  60 70 30 50 88 df 40 00  11d+15:30:11.539  READ FPDMA QUEUED

Error 2 occurred at disk power-on lifetime: 12914 hours (538 days + 2 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 18 b8 a5 f4 40 00   9d+16:48:54.839  READ FPDMA QUEUED
  60 00 30 b8 a9 f4 40 00   9d+16:48:54.834  READ FPDMA QUEUED
  60 a0 28 00 3e dc 40 00   9d+16:48:54.834  READ FPDMA QUEUED
  60 00 20 b8 ad f4 40 00   9d+16:48:54.834  READ FPDMA QUEUED
  60 00 10 b8 a1 f4 40 00   9d+16:48:54.834  READ FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 12723 hours (530 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 41 00 00 00 00 00  Error: ICRC, ABRT at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 10 f8 31 3e 40 00   1d+17:49:12.918  READ FPDMA QUEUED
  60 00 08 28 4b 71 40 00   1d+17:49:12.917  READ FPDMA QUEUED
  60 20 00 c8 8d 3e 40 00   1d+17:49:12.916  READ FPDMA QUEUED
  60 08 20 60 ff 0d 40 00   1d+17:49:12.862  READ FPDMA QUEUED
  60 88 18 70 28 3e 40 00   1d+17:49:12.862  READ FPDMA QUEUED

 

Edited January 20, 2023 by SiRMarlon
added info

[JorgeB]

Leave it alone for now, if it keeps increasing replace the SATA cable.