Suse User Posted March 6, 2023 Share Posted March 6, 2023 For years I couldn't even upgrade to v5release due to a hardware incompatibility, a certain beta version worked, but beyond that it wouldn't boot. Having abandoned my 6 port SAS controller I am now able to run v5.x, but when I trying to upgrade to v6 I don't even get to the screen to choose which boot option I want. I've followed the upgrade instructions meticulously, I've tried the Unraid USB creator and tried the manual method using 3 different Sony & Verbatim USB sticks (I have 4 licences) but all stop at the same point, just before I'd expect the boot menu to appear if it was v5. v5 boots just fine. I ran the test and my CPU is 64bit & I have 3gb Ram in the server. USB sticks ranged from 1gb to 64gb (I didn't have a 32 to try, and the 64 gb stick got just as far as the smaller ones). Could there be a BIOS setting I should be turning off perhaps? ALL my drives are connected via SAS controller in my 24 bay server case. I'm in the middle of another Parity rebuild currently as I'm replacing disks with larger ones, so I can't give it another try until tomorrow anyway, but any suggestions are welcome. Thanks. Quote Link to comment
itimpi Posted March 6, 2023 Share Posted March 6, 2023 One suggestion is to try using Rufus to format the flash drive as that seems to have worked for some people. Are you trying to boot in legacy or UEFI mode? One BIOS setting that interferes with booting is having Fast Boot set, but if this is old hardware it is unlikely your BIOS has that option. Quote Link to comment
JonathanM Posted March 7, 2023 Share Posted March 7, 2023 17 hours ago, Suse User said: 3gb Ram in the server. While this shouldn't cause the symptoms you are having, it will severely limit operations for V6. 4GB is a bare minimum these days. Quote Link to comment
Suse User Posted March 7, 2023 Author Share Posted March 7, 2023 22 hours ago, itimpi said: One suggestion is to try using Rufus to format the flash drive as that seems to have worked for some people. Are you trying to boot in legacy or UEFI mode? I'll take a look at Rufus, but the boot sequence does start, it just hangs at the exact same point each time. I only have a Mac, but I know someone with a PC if Rufus is a PC program. I'm using UEFI mode currently as that's what the installer defaulted to. Quote Link to comment
Suse User Posted March 7, 2023 Author Share Posted March 7, 2023 4 hours ago, JonathanM said: While this shouldn't cause the symptoms you are having, it will severely limit operations for V6. 4GB is a bare minimum these days. Good to know, it's an old server so memory might be difficult to source for it, but I'll investigate adding more. I did have 4gb in there, but 1 one the memory sticks turned out to be faulty on memtest. Quote Link to comment
Suse User Posted March 7, 2023 Author Share Posted March 7, 2023 (edited) I've decided to abandon this motherboard/memory & use another from a different donor system. I successfully booted from that PC, so will switch the motherbaord & memory into my Server case. Thanks anyway guys. Edited March 7, 2023 by Suse User Autocorrect error Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.