terratrax Posted August 23, 2023 Author Share Posted August 23, 2023 Hi Goldbondx, you might try the regular support forums and see if they can help on the front end of the app. The only difference between this docker image and the stock one for version 26 is the addition of the libraries needed for the facial recognition apps, which sounds like are working OK so my guess is that it has something to do with the Recognize plugin configuration itself, of which I'm not an expert unfortunately! Quote Link to comment
swtz Posted September 8, 2023 Share Posted September 8, 2023 As a complete nextcloud newb, a "data" path would probably make sense in the unraid docker config screen, luckily I'm just testing everything out now lol! Quote Link to comment
gowthamn Posted September 23, 2023 Share Posted September 23, 2023 I already have nextcloud installed. Should I delete that installation and install this? Quote Link to comment
terratrax Posted September 23, 2023 Author Share Posted September 23, 2023 If you already have Nextcloud installed using the stock image then you shouldn't need to delete it. Just change the image and you should be good to go! Quote Link to comment
gowthamn Posted September 23, 2023 Share Posted September 23, 2023 Does this have the memories app? Quote Link to comment
gowthamn Posted September 25, 2023 Share Posted September 25, 2023 On 9/23/2023 at 4:58 AM, terratrax said: If you already have Nextcloud installed using the stock image then you shouldn't need to delete it. Just change the image and you should be good to go! How do I change the image for an existing installation in Unraid? 1 Quote Link to comment
gowthamn Posted October 29, 2023 Share Posted October 29, 2023 On 9/23/2023 at 4:58 AM, terratrax said: If you already have Nextcloud installed using the stock image then you shouldn't need to delete it. Just change the image and you should be good to go! Hi, I already have Nextcloud and MariaDB installed and using it together. How do I update the existing Nextcloud install to this one? Quote Link to comment
Zhono Posted November 19, 2023 Share Posted November 19, 2023 Any chance this will be getting updated to the latest version of Nextcloud? There are a lot of new features getting missed out on, if you use this version. Like the AI stuff. Quote Link to comment
terratrax Posted November 24, 2023 Author Share Posted November 24, 2023 There were some incompatibilities with the base image a couple of revisions ago that made this impossible or difficult. Let me give it another go, will update within the next week! Quote Link to comment
Shawn Young Posted December 1, 2023 Share Posted December 1, 2023 On 11/24/2023 at 9:17 AM, terratrax said: There were some incompatibilities with the base image a couple of revisions ago that made this impossible or difficult. Let me give it another go, will update within the next week! I just set up the Linuxserver's Nextcloud. The good thing is that it comes with SSL. The bad thing is that it is hard to install pdlib and it cannot install/use any Office document server build-in. I am looking forward to your masterpiece. Quote Link to comment
Shawn Young Posted December 6, 2023 Share Posted December 6, 2023 On 11/24/2023 at 9:17 AM, terratrax said: There were some incompatibilities with the base image a couple of revisions ago that made this impossible or difficult. Let me give it another go, will update within the next week! how soon can you release nextcloud-muiltmedia with Nextcloud 27? Quote Link to comment
theDrell Posted December 7, 2023 Share Posted December 7, 2023 I too was running the base Nextcloud 27 and would love to transfer to your docker container for ffmpeg and the facial recognition. I swapped out the repo path to your container only to realize that, oh no.. its not compatible with 27 and I can't roll back. Quote Link to comment
theDrell Posted December 8, 2023 Share Posted December 8, 2023 (edited) On 11/23/2023 at 7:17 PM, terratrax said: There were some incompatibilities with the base image a couple of revisions ago that made this impossible or difficult. Let me give it another go, will update within the next week! I took a stab at fixing the dockerfile you had. here is the updated one. Changes: changed the base nextcould instance to nextcloud:27.1.4-apache had to change the from libopenblas-base to dev since base wasn't available version in COPY --from=builder /usr/local/lib/php/extensions/no-debug-non-zts-20220829/pdlib.so /usr/local/lib/php/extensions/no-debug-non-zts-20220829/ changed to what you see here cmake version is updated so the configure command for dlib changed It now builds, if you have a way to test it easily then try the attached file and update your container.. If after a couple of days you don't, I'll figure out how to test it and then upload a new competing container (please don't make me do that) I will also attempt to do a pull request into your github,, I don't know how to create the template for Unraid.. too lazy to do it Dockerfile Edited December 8, 2023 by theDrell added pull request to github Quote Link to comment
terratrax Posted December 11, 2023 Author Share Posted December 11, 2023 (edited) Hi all and sorry for the delay - this was one of those things where upgrading one thing broke another and so on. It just took some sitting down for a few hours to work through it all and then some more time testing to make sure the image worked in my environment. New image is up with updates dlib, pdlib, and of course Nextcloud 27.1.4! Edited December 11, 2023 by terratrax Quote Link to comment
terratrax Posted December 11, 2023 Author Share Posted December 11, 2023 On 12/7/2023 at 9:59 PM, theDrell said: I took a stab at fixing the dockerfile you had. here is the updated one. Changes: changed the base nextcould instance to nextcloud:27.1.4-apache had to change the from libopenblas-base to dev since base wasn't available version in COPY --from=builder /usr/local/lib/php/extensions/no-debug-non-zts-20220829/pdlib.so /usr/local/lib/php/extensions/no-debug-non-zts-20220829/ changed to what you see here cmake version is updated so the configure command for dlib changed It now builds, if you have a way to test it easily then try the attached file and update your container.. If after a couple of days you don't, I'll figure out how to test it and then upload a new competing container (please don't make me do that) I will also attempt to do a pull request into your github,, I don't know how to create the template for Unraid.. too lazy to do it Dockerfile 2.79 kB · 0 downloads Hi and thanks for your effort but it was sorted out already - I like to let new images bake in my environment for a few days (I keep good backups) before I push an image. Quote Link to comment
Shawn Young Posted December 11, 2023 Share Posted December 11, 2023 2 hours ago, terratrax said: Hi and thanks for your effort but it was sorted out already - I like to let new images bake in my environment for a few days (I keep good backups) before I push an image. would you mind adding the self-sign SSL? Quote Link to comment
terratrax Posted December 11, 2023 Author Share Posted December 11, 2023 (edited) Linuxserver uses their own alpine linux image and fpm to host nextcloud as opposed to this image which is Nextclouds official docker image with some added libraries. This is not to say it wouldn't be possible, but right now anyone that uses this image can 100% rely on Nextcloud documentation and I'd like to keep it this way. Edited December 11, 2023 by terratrax Quote Link to comment
Shawn Young Posted December 12, 2023 Share Posted December 12, 2023 12 hours ago, terratrax said: Linuxserver uses their own alpine linux image and fpm to host nextcloud as opposed to this image which is Nextclouds official docker image with some added libraries. This is not to say it wouldn't be possible, but right now anyone that uses this image can 100% rely on Nextcloud documentation and I'd like to keep it this way. Fair enough, but when can you release it? Quote Link to comment
terratrax Posted December 12, 2023 Author Share Posted December 12, 2023 Sorry if I wasn't clear but I'm not planning to release an image with self-signed SSL because it would require some pretty significant changes to the official Nextcloud image which I'd like to avoid. Also with Letsencrypt and things like NginxProxyManager, you can get real, signed certs for free instead of using self-signed ones. Id highly recommend checking these out if you are familiar with them. Quote Link to comment
viviolay Posted December 12, 2023 Share Posted December 12, 2023 Hello, Sorry to bother, but my nextcloud docker was running without any issues (thank you again). However, it stopped being able to start due to the following error. /entrypoint.sh: 111: cannot create /usr/local/etc/php/conf.d/redis-session.ini: Permission denied I haven’t really changed anything or touched it at all really - so I’m not sure what could cause this? I am currently looking up solutions but wanted to post here too. Quote Link to comment
terratrax Posted December 12, 2023 Author Share Posted December 12, 2023 This is usually caused by incorrect permissions in the dockers appdata folder. Whatever UID you have the container set to run with needs write access to this folder (within appdata). Should be a pretty easy fix! Quote Link to comment
Shawn Young Posted December 12, 2023 Share Posted December 12, 2023 10 hours ago, terratrax said: Sorry if I wasn't clear but I'm not planning to release an image with self-signed SSL because it would require some pretty significant changes to the official Nextcloud image which I'd like to avoid. Also with Letsencrypt and things like NginxProxyManager, you can get real, signed certs for free instead of using self-signed ones. Id highly recommend checking these out if you are familiar with them. Totally undserstood. I mean when can you release your docker image, which is based on nextcloud 27 offical. Quote Link to comment
terratrax Posted December 12, 2023 Author Share Posted December 12, 2023 It was released a couple of days ago actually. Quote Link to comment
Shawn Young Posted December 13, 2023 Share Posted December 13, 2023 22 hours ago, terratrax said: It was released a couple of days ago actually. Oh, I must have missed. Thank u!!!!!! Quote Link to comment
Shawn Young Posted December 28, 2023 Share Posted December 28, 2023 On 12/13/2023 at 1:44 AM, terratrax said: It was released a couple of days ago actually. Hi,I have transfered my Nextcloud to your docker image, but I got two issues. 1.after imstall memories and face Recognition, I see people tab in both Photos and Memories' sidebar, but I didn't see Persons tab.Why? how to solve? 2.System Cron job doesn't work. I tried crontab command, it shows command not found. Do we have to install cronjob manually? How? Thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.