Jump to content

Is my SSD faulty


Recommended Posts

I had a warning on my unraid machine along with multiple crashes. 

 

The following drive is used as the Cache drive.

 

The diagnostics log is below

smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.23-Unraid] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 860 PRO 1TB
Serial Number:    S42NNX0R702113D
LU WWN Device Id: 5 002538 e41713dae
Firmware Version: RVM02B6Q
User Capacity:    1,024,209,543,168 bytes [1.02 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available, deterministic, zeroed
Device is:        In smartctl database 7.3/5440
ATA Version is:   ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Apr 22 08:20:06 2023 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x53) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  85) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  9 Power_On_Hours          -O--CK   097   097   000    -    14223
 12 Power_Cycle_Count       -O--CK   099   099   000    -    71
177 Wear_Leveling_Count     PO--C-   097   097   000    -    65
179 Used_Rsvd_Blk_Cnt_Tot   PO--C-   100   100   010    -    0
181 Program_Fail_Cnt_Total  -O--CK   100   100   010    -    0
182 Erase_Fail_Count_Total  -O--CK   100   100   010    -    0
183 Runtime_Bad_Block       PO--C-   100   100   010    -    0
187 Uncorrectable_Error_Cnt -O--CK   100   100   000    -    0
190 Airflow_Temperature_Cel -O--CK   074   060   000    -    26
195 ECC_Error_Rate          -O-RC-   200   200   000    -    0
199 CRC_Error_Count         -OSRCK   099   099   000    -    13
235 POR_Recovery_Count      -O--C-   099   099   000    -    40
241 Total_LBAs_Written      -O--CK   099   099   000    -    48420193736
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      1  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x13       GPL     R/O      1  SATA NCQ Send and Receive log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1           SL  VS      16  Device vendor specific log
0xa5           SL  VS      16  Device vendor specific log
0xce-0xcf      SL  VS      16  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      2274         -
# 2  Short offline       Completed without error       00%      2272         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
Device State:                        Active (0)
Current Temperature:                    26 Celsius
Power Cycle Min/Max Temperature:     19/34 Celsius
Lifetime    Min/Max Temperature:     15/40 Celsius
Specified Max Operating Temperature:    70 Celsius
Under/Over Temperature Limit Count:   0/0
SMART Status:                        0xc24f (PASSED)

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        10 minutes
Min/Max recommended Temperature:      0/70 Celsius
Min/Max Temperature Limit:            0/70 Celsius
Temperature History Size (Index):    128 (28)

Index    Estimated Time   Temperature Celsius
  29    2023-04-21 11:10    25  ******
  30    2023-04-21 11:20    24  *****
  31    2023-04-21 11:30    24  *****
  32    2023-04-21 11:40    25  ******
 ...    ..( 39 skipped).    ..  ******
  72    2023-04-21 18:20    25  ******
  73    2023-04-21 18:30    28  *********
  74    2023-04-21 18:40    29  **********
  75    2023-04-21 18:50    31  ************
  76    2023-04-21 19:00    29  **********
  77    2023-04-21 19:10    28  *********
  78    2023-04-21 19:20    26  *******
  79    2023-04-21 19:30    26  *******
  80    2023-04-21 19:40    25  ******
  81    2023-04-21 19:50    25  ******
  82    2023-04-21 20:00    25  ******
  83    2023-04-21 20:10    29  **********
  84    2023-04-21 20:20    32  *************
  85    2023-04-21 20:30    34  ***************
  86    2023-04-21 20:40    31  ************
  87    2023-04-21 20:50    29  **********
  88    2023-04-21 21:00    32  *************
  89    2023-04-21 21:10    32  *************
  90    2023-04-21 21:20    32  *************
  91    2023-04-21 21:30    33  **************
  92    2023-04-21 21:40    33  **************
  93    2023-04-21 21:50    33  **************
  94    2023-04-21 22:00    29  **********
  95    2023-04-21 22:10    28  *********
  96    2023-04-21 22:20    27  ********
 ...    ..(  4 skipped).    ..  ********
 101    2023-04-21 23:10    27  ********
 102    2023-04-21 23:20    26  *******
 ...    ..(  3 skipped).    ..  *******
 106    2023-04-22 00:00    26  *******
 107    2023-04-22 00:10    27  ********
 108    2023-04-22 00:20    26  *******
 109    2023-04-22 00:30    27  ********
 ...    ..(  3 skipped).    ..  ********
 113    2023-04-22 01:10    27  ********
 114    2023-04-22 01:20    30  ***********
 115    2023-04-22 01:30    31  ************
 116    2023-04-22 01:40    29  **********
 117    2023-04-22 01:50    30  ***********
 118    2023-04-22 02:00    27  ********
 ...    ..(  3 skipped).    ..  ********
 122    2023-04-22 02:40    27  ********
 123    2023-04-22 02:50    26  *******
 124    2023-04-22 03:00    26  *******
 125    2023-04-22 03:10    27  ********
 126    2023-04-22 03:20    27  ********
 127    2023-04-22 03:30    27  ********
   0    2023-04-22 03:40    28  *********
   1    2023-04-22 03:50    26  *******
   2    2023-04-22 04:00    30  ***********
   3    2023-04-22 04:10    27  ********
   4    2023-04-22 04:20    26  *******
 ...    ..( 21 skipped).    ..  *******
  26    2023-04-22 08:00    26  *******
  27    2023-04-22 08:10    25  ******
  28    2023-04-22 08:20    25  ******

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4              71  ---  Lifetime Power-On Resets
0x01  0x010  4           14223  ---  Power-on Hours
0x01  0x018  6     48420193736  ---  Logical Sectors Written
0x01  0x020  6       872604660  ---  Number of Write Commands
0x01  0x028  6    122307369823  ---  Logical Sectors Read
0x01  0x030  6       881469510  ---  Number of Read Commands
0x01  0x038  6         2294000  ---  Date and Time TimeStamp
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4               1  ---  Resets Between Cmd Acceptance and Completion
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              26  ---  Current Temperature
0x05  0x020  1              40  ---  Highest Temperature
0x05  0x028  1              15  ---  Lowest Temperature
0x05  0x058  1              70  ---  Specified Maximum Operating Temperature
0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
0x06  0x008  4             424  ---  Number of Hardware Resets
0x06  0x010  4               0  ---  Number of ASR Events
0x06  0x018  4              13  ---  Number of Interface CRC Errors
0x07  =====  =               =  ===  == Solid State Device Statistics (rev 1) ==
0x07  0x008  1               3  N--  Percentage Used Endurance Indicator
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            4  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2           47  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2           47  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...