stev067 Posted August 25, 2023 Share Posted August 25, 2023 Sorry I know this is probably trivial... Just moved to a new house, and I had successfully connected my server and windows PC. I was able to access it via the local network for a few days. Then yesterday I noticed a warning in the upper right corner but didn't address it. At some point, I was no longer able to access the server GUI. I have rebooted the server and my PC, and power cycled the network switches. I'm able to ping it from my PC, but still cannot access the GUI. I'm having trouble connecting via SSH or even getting a display out to a monitor. Where should I start? I'm using the same address that has always worked. Quote Link to comment
stev067 Posted August 25, 2023 Author Share Posted August 25, 2023 Ok I was able to get a monitor going, forgot it had to be connected to a GPU instead of the mobo. Looks like it wasn't completing boot. Also looks like I don't have a flash backup on unraid connect. I know I set up backup somewhere. I put a clean install of unraid on the flash, and now have to try and figure out how to restore the old flash. Quote Link to comment
itimpi Posted August 25, 2023 Share Posted August 25, 2023 You do not mention how it is failing to boot. Sometimes downloading the zip file for a release and extracting all the bz* type file and overwriting the copies on the flash drive can help. In terms of backup all your settings are in the ‘config’ folder on the flash drive if that can be read. Quote Link to comment
stev067 Posted August 25, 2023 Author Share Posted August 25, 2023 (edited) It was stopping and hanging at various lines depending on which boot method I chose, and never reaching a login line. I just did replace the config folder onto a clean boot, and was able to finally pull diagnostics. I can see that it boots to the login line, but am still unable to reach the GUI from my local network. I booted the clean flash once before replacing the config folder, and was able to reach the GUI, which tells me my network is fine, and the issue is on the server side. tower-diagnostics-20230825-1112.zip Edited August 25, 2023 by stev067 Quote Link to comment
JorgeB Posted August 26, 2023 Share Posted August 26, 2023 Delete/rename /boot/config/network.cfg and reboot, LAN settings will go back to default DHCP, if that doesn't help post new diags. Quote Link to comment
stev067 Posted August 26, 2023 Author Share Posted August 26, 2023 2 hours ago, JorgeB said: Delete/rename /boot/config/network.cfg and reboot, LAN settings will go back to default DHCP, if that doesn't help post new diags. Is it supposed to re-create network.cfg? It's getting to the login line, but not creating a new network.cfg, and still no access to GUI over the network. tower-diagnostics-20230826-0441.zip Quote Link to comment
stev067 Posted August 26, 2023 Author Share Posted August 26, 2023 (edited) Something in the config folder seems to be the problem, and it's not /ssh, /ssl, or network.cfg, because I overwrote the entire /config with that of my backup, minus those I mentioned, on a fresh flash, and that makes the difference between booting or not. Edited August 26, 2023 by stev067 Quote Link to comment
JorgeB Posted August 26, 2023 Share Posted August 26, 2023 11 hours ago, stev067 said: Is it supposed to re-create network.cfg? Only after you make a change, DHCP is working correctly: Aug 26 04:40:36 [1769]: br0: leased 192.168.86.84 for 86400 seconds See if you can access the GUI using the IP, type http:// before since most browsers now default to https, if it still doesn't work probably best to redo the flash drive, restore the bare minimum, like array and pools assignments, the key and then reconfigure the rest, or restore a few files at a time until you find the culprit. Quote Link to comment
stev067 Posted August 27, 2023 Author Share Posted August 27, 2023 If I restore everything but the plugins folder, I can get it to boot up and access it. Any idea what in there might be causing problems? Quote Link to comment
JorgeB Posted August 27, 2023 Share Posted August 27, 2023 Not really, 15 hours ago, JorgeB said: then reconfigure the rest, or restore a few files at a time until you find the culprit. Quote Link to comment
stev067 Posted August 28, 2023 Author Share Posted August 28, 2023 Thanks, I was able to locate a fairly recent backup on my cache drive, and take the plugins folder from it, and added it to the mix. Back to normal now, and activated the flash backups from unraid connect. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.