nicecube Posted September 7, 2023 Share Posted September 7, 2023 Hello Unraid community, I've been using Unraid OS for several years now, but I've been encountering issues over the past few months. Believing it could be a hardware issue, I decided to change my motherboard. However, even after the change, I'm still experiencing strange issues: The web interface is not working. SSH is unresponsive. This morning, both the web interface and SSH were down, and my VMs were unresponsive. Interestingly, my Plex and some dockers were still running. I had to do a forced restart, and a few minutes later, I received a message indicating that my USB key was corrupted. I'm reaching out to seek advice or solutions to resolve these persistent issues. Has anyone faced similar problems? Any guidance would be greatly appreciated. Thank you in advance. tower-diagnostics-20230907-0954.zip Quote Link to comment
JorgeB Posted September 7, 2023 Share Posted September 7, 2023 Enable the syslog server and post that after a crash. Quote Link to comment
nicecube Posted September 7, 2023 Author Share Posted September 7, 2023 27 minutes ago, JorgeB said: Enable the syslog server and post that after a crash. Here is my syslog file syslog-172.16.82.5.log Quote Link to comment
nicecube Posted September 7, 2023 Author Share Posted September 7, 2023 I just replaced my usb key, because I restarted the server 2-3 times this morning because I still had the usb key error. I restart the server now I'll see if the error comes back quickly. Quote Link to comment
nicecube Posted September 7, 2023 Author Share Posted September 7, 2023 I replaced the USB key and I still have the message Quote Link to comment
JorgeB Posted September 7, 2023 Share Posted September 7, 2023 14 minutes ago, nicecube said: I replaced the USB key and I still have the message Try rebooting, the Connect plugin can take some time to show the correct key status. Quote Link to comment
nicecube Posted September 7, 2023 Author Share Posted September 7, 2023 28 minutes ago, JorgeB said: Try rebooting, the Connect plugin can take some time to show the correct key status. I was able to activate the USB key, that's not the problem. The issue is that after a few minutes, the key seems to disconnect from the server as if I had removed it. I switched the USB port to see if I still have the problem. Quote Link to comment
JorgeB Posted September 7, 2023 Share Posted September 7, 2023 The syslog did show flash drive problems, if replacing the flash drive doesn't help it's likely a USB problem, try a different port, ideally USB 2.0. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.