ibasaw Posted September 16, 2023 Share Posted September 16, 2023 (edited) hi, i got LSI 9210-8I (IT MODE) with 10 drives 3.5 HDD, my datas are on the raid. i got 2 drives for partiy, one ssd for cache, and 6 drives for datas + 1 spare drive for vm. i need to buy new harware but i don't know wich one. My old SuperMicro 846E16-R1200B W/ X9DRI-F 24 died ! i would like to stay below 1000 € if possible. i would like to have an ATX tower, to put inside my LSI 9210-8I and 10 drives + 1 nvidia GTX 1070 card. how to connect 10 drives as SAS with the LSI 9210-8I (IT MODE) on a motherboard ? best regards Edited September 17, 2023 by ibasaw Quote Link to comment
ibasaw Posted September 16, 2023 Author Share Posted September 16, 2023 i think i can buy this product https://www.amazon.com/Internal-3-3ft-SFF-8087-4xSATA-Transmission/dp/B088H2QLBQ/ref=sr_1_15?crid=65WETASXCB3N&keywords=SAS%2B8087&qid=1694856612&sprefix=sas%2B8087%2Caps%2C234&sr=8-15&th=1 if i buy 2 of this, i could wire 8 drives. is that correct to say if i plug only my "datas" drive on theses cable to my LSI 9210-8I, and my 2 partity drives and the cache drive to the motherboard itself, is my unraid build will reconize my all disk and datas ? i really need to access again to my datas. ++ Quote Link to comment
JorgeB Posted September 16, 2023 Share Posted September 16, 2023 1 minute ago, ibasaw said: is my unraid build will reconize my all disk and datas ? It should 1 Quote Link to comment
ibasaw Posted September 17, 2023 Author Share Posted September 17, 2023 i had bought a new setup, waiting for it. I hope it will be fonctionnal. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.