[solved] need to buy a new setup build with LSI 9210-8I (IT MODE)

[ibasaw]

hi,

 

i got LSI 9210-8I (IT MODE) with 10 drives 3.5 HDD, my datas are on the raid.

i got 2 drives for partiy, one ssd for cache, and 6 drives for datas + 1 spare drive for vm.

 

i need to buy new harware but i don't know wich one. My old SuperMicro 846E16-R1200B W/ X9DRI-F 24 died ! 

i would like to stay below 1000 € if possible.

 

i would like to have an ATX tower, to put inside my LSI 9210-8I and 10 drives + 1 nvidia GTX 1070 card.

 

how to connect 10 drives as SAS with the LSI 9210-8I (IT MODE) on a motherboard ?

 

best regards

Edited September 17, 2023 by ibasaw

[ibasaw]

i think i can buy this product

 

https://www.amazon.com/Internal-3-3ft-SFF-8087-4xSATA-Transmission/dp/B088H2QLBQ/ref=sr_1_15?crid=65WETASXCB3N&keywords=SAS%2B8087&qid=1694856612&sprefix=sas%2B8087%2Caps%2C234&sr=8-15&th=1

 

if i buy 2 of this, i could wire 8 drives.

 

is that correct to say if i plug only my "datas" drive on theses cable to my LSI 9210-8I, and my 2 partity drives and the cache drive to the motherboard itself, is my unraid build will reconize my all disk and datas ?

 

i really need to access again to my datas.

 

++

[JorgeB]

1 minute ago, ibasaw said:

is my unraid build will reconize my all disk and datas ?

It should

[ibasaw]

i had bought a new setup, waiting for it. I hope it will be fonctionnal.