Solved - how to update LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)

[francrouge]

Hi guys i'm having a lot of issue with multiple hdd and i changed the cables etc and i was wondering if i needed to update the firmware card maybe 

 

I got this card LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)

00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
        Subsystem: Broadcom / LSI 9211-8i
        Flags: bus master, fast devsel, latency 0, IRQ 42, IOMMU group 25
        I/O ports at d000
        Memory at c2540000 (64-bit, non-prefetchable)
        Memory at c2100000 (64-bit, non-prefetchable)
        Expansion ROM at <ignored> [disabled]
        Capabilities: [50] Power Management version 3
        Capabilities: [68] Express Endpoint, MSI 00
        Capabilities: [d0] Vital Product Data
        Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [c0] MSI-X: Enable+ Count=15 Masked-
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [138] Power Budgeting <?>
        Capabilities: [150] Single Root I/O Virtualization (SR-IOV)
        Capabilities: [190] Alternative Routing-ID Interpretation (ARI)
        Kernel driver in use: mpt3sas

        Kernel modules: mpt3sas

Can someone guide me on how to update ?

 

thx

Edited October 18, 2023 by francrouge

[JorgeB]

You didn't post the current firmware, post the diagnostics. 

[francrouge]

You didn't post the current firmware, post the diagnostics. 

sorry i forgot

Here you go

Thx unraid-diagnostics-20231018-0515.zip

Envoyé de mon Pixel 2 XL en utilisant Tapatalk

[JorgeB]

mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00)

 

This is already the latest firmware, problem looks more power/connection related, try a different PSU if possible, also avoid any SATA splitters, especially if splitting one SATA into more than two.

[francrouge]

2 minutes ago, JorgeB said:

mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00)

 

This is already the latest firmware, problem looks more power/connection related, try a different PSU if possible, also avoid any SATA splitters, especially if splitting one SATA into more than two.

super thx i will try that then thx a lot for your time