sonic6 Posted December 16, 2023 Share Posted December 16, 2023 (edited) Hello, after my last reboot, my sonoff zigbee stick isn't working on the usb slots from i/o shield. front usb slots are working. i hope you can help me. unraid-1-diagnostics-20231216-1748.zip Edited February 9 by sonic6 Quote Link to comment
sonic6 Posted December 17, 2023 Author Share Posted December 17, 2023 (edited) so, i tried another USB slot from the i/o shild and this one works fine: (1) is the Zigbee (2) is my UPS which is connected to the usb slot were the zigbee stick was before i also tried 6.12.4 which is the same. this is from my syslog, when i disconnected and reconnect it: Dec 17 11:09:07 Unraid-1 kernel: usb 1-9: USB disconnect, device number 8 Dec 17 11:09:07 Unraid-1 kernel: cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 Dec 17 11:09:07 Unraid-1 kernel: cp210x 1-9:1.0: device disconnected Dec 17 11:09:10 Unraid-1 kernel: usb 1-3: new full-speed USB device number 9 using xhci_hcd Dec 17 11:09:44 Unraid-1 kernel: usb 1-3: new full-speed USB device number 10 using xhci_hcd Dec 17 11:09:44 Unraid-1 kernel: usb 1-3: Device not responding to setup address. Dec 17 11:09:44 Unraid-1 kernel: usb 1-3: Device not responding to setup address. Dec 17 11:09:44 Unraid-1 kernel: usb 1-3: device not accepting address 10, error -71 Dec 17 11:09:48 Unraid-1 kernel: usb 1-9: new full-speed USB device number 12 using xhci_hcd Dec 17 11:09:48 Unraid-1 kernel: cp210x 1-9:1.0: cp210x converter detected Dec 17 11:09:48 Unraid-1 kernel: usb 1-9: cp210x converter now attached to ttyUSB0 Edited December 17, 2023 by sonic6 Quote Link to comment
sonic6 Posted January 17 Author Share Posted January 17 Is there something i can do, to identificate where the problem is? Stick is still working on another Port. Other Hardware is working on this Port. Quote Link to comment
christobaass Posted January 30 Share Posted January 30 I'm also running into this issue. Any ideas? Quote Link to comment
sonic6 Posted January 31 Author Share Posted January 31 Sadly no, i was low on time the last few weeks, so i just switched over to another USB Port, but when i use the old Port, it is still the same problem. Quote Link to comment
sonic6 Posted February 9 Author Share Posted February 9 Still the same Problem, also with other USB Devices: Feb 9 14:13:16 Unraid-1 kernel: usb 1-3: new full-speed USB device number 16 using xhci_hcd Feb 9 14:13:16 Unraid-1 kernel: input: PiKVM PiKVM HID as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:1209:EDA2.0011/input/input20 Feb 9 14:13:16 Unraid-1 kernel: hid-generic 0003:1209:EDA2.0011: input,hidraw0: USB HID v1.11 Keyboard [PiKVM PiKVM HID] on usb-0000:00:14.0-3/input0 Feb 9 14:13:16 Unraid-1 kernel: input: PiKVM PiKVM HID as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:1209:EDA2.0012/input/input21 Feb 9 14:13:16 Unraid-1 kernel: hid-generic 0003:1209:EDA2.0012: input,hidraw2: USB HID v1.11 Mouse [PiKVM PiKVM HID] on usb-0000:00:14.0-3/input1 Feb 9 14:13:16 Unraid-1 elogind-daemon[1326]: Watching system buttons on /dev/input/event6 (PiKVM PiKVM HID) Feb 9 14:13:16 Unraid-1 kernel: usb 1-3: USB disconnect, device number 16 Feb 9 14:13:16 Unraid-1 acpid: input device has been disconnected, fd 12 unraid-1-diagnostics-20240209-1420.zip Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.