clowncracker Posted December 31, 2023 Share Posted December 31, 2023 (edited) Parity check started last night and I'm already at 873 errors. Parity check completed last month with no errors, so I was hoping someone could look at the diagnostics and troubleshoot the issue. Edited January 8 by clowncracker Quote Link to comment
itimpi Posted December 31, 2023 Share Posted December 31, 2023 I can see quite a lot of Power-on or device reset occurred messages in the syslog, but not sure what device(s) they refer to. Quote Link to comment
clowncracker Posted December 31, 2023 Author Share Posted December 31, 2023 (edited) 1 hour ago, itimpi said: I can see quite a lot of Power-on or device reset occurred messages in the syslog, but not sure what device(s) they refer to. Any way to check which device it is referring to? That can be any drive or any cable, it's near impossible to troubleshoot. Edited December 31, 2023 by clowncracker Quote Link to comment
Solution JorgeB Posted January 1 Solution Share Posted January 1 Log shows possible power/connections issues with parity and disk9, but they may be unrelated to the sync errors, should still be fixed though, you sure no unclean shutdown since last check? Quote Link to comment
clowncracker Posted January 1 Author Share Posted January 1 (edited) 7 hours ago, JorgeB said: Log shows possible power/connections issues with parity and disk9, but they may be unrelated to the sync errors, should still be fixed though, you sure no unclean shutdown since last check? There has been no unclean shutdown since the last check. Both of those drives are on power splitters though, not sure if that makes a huge difference. https://www.amazon.com/gp/product/B012BPLW08/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Attached are my PSU specs. Just for my own knowledge, how did you identify the issues were disk9 and parity? Edited January 1 by clowncracker Quote Link to comment
JorgeB Posted January 2 Share Posted January 2 14 hours ago, clowncracker said: Just for my own knowledge, how did you identify the issues were disk9 and parity? Syslog then map the devices to the ones in lsscsi.txt Quote Link to comment
clowncracker Posted January 5 Author Share Posted January 5 It ended up being a power problem, I replaced the sata power cables and the problem is now resolved. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.