ultraflip Posted January 29 Share Posted January 29 Hi All, I've added a 2.5gb card to my unraid server... both interfaces populate and seem to have traffic going through them as the onboard 1gb nic is reflected as eth0 and the 2.5gb card is reflected as eth1. I was hoping to have the new 2.5gb be the primary and reflected as eth0 moving forward but for the life of me, I can't figure out where the heck the interface rules are. Settings > Network Settings only reflects interface eth 0, interface eth 1, interface extra and routing table. Any help would be greatly appreciated! flipraid-diagnostics-20240128-2207.zip Quote Link to comment
Vr2Io Posted January 29 Share Posted January 29 At the most right side, does "arrow" point upward ? Anyway just click it to check any different. Quote Link to comment
ultraflip Posted January 29 Author Share Posted January 29 (edited) all arrows pointed upward clicked all of them just to make sure... same thing no interface rules Edited January 29 by ultraflip Quote Link to comment
ultraflip Posted January 30 Author Share Posted January 30 Bumping up with additional info Spent time with the amazing individuals within the unraid discord. We've disabled bridging and enabled bonding... rebooted the server... Still didnt get the interface rules option within settings. Validated from one of the individuals within discord that i "may have gremlins"... any additional help would be greatly appreciated! Quote Link to comment
JorgeB Posted February 12 Share Posted February 12 Try renaming/deleting /boot/config/network.cfg and reboot. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.