techystreamer Posted March 6 Author Share Posted March 6 49 minutes ago, JorgeB said: Not sure it that's related to the problem but I see a lot of GPU related issues logged, if you are not using it for transcoding or similar try backlisting the amdgpu driver: https://docs.unraid.net/unraid-os/release-notes/6.10.0#linux-kernel I use the gpu sometimes to access the bare metal ssd windows system I have on the pc. Would this affect that? Also I see where it is noted in the release but where would that be implemented and what would I input for my case? Thanks. Quote Link to comment
JorgeB Posted March 6 Share Posted March 6 10 minutes ago, techystreamer said: I use the gpu sometimes to access the bare metal ssd windows system I have on the pc. Would this affect that? No. Type that echo command but replace both i915 occurrences with amdgpu Quote Link to comment
techystreamer Posted March 6 Author Share Posted March 6 15 minutes ago, JorgeB said: No. Type that echo command but replace both i915 occurrences with amdgpu So this just goes in the terminal? I guess that would be temporary then? Quote Link to comment
JorgeB Posted March 6 Share Posted March 6 In the terminal yes, but it's written to the flash drive, so it works until deleted. 1 Quote Link to comment
techystreamer Posted March 22 Author Share Posted March 22 On 3/6/2024 at 10:09 AM, JorgeB said: In the terminal yes, but it's written to the flash drive, so it works until deleted. How do I reverrse the echo command or remove the blacklist on the amdgpu? It wasn't the issue. I ended up having to do the parity sync in safe mode and I rolled the os back to 6.12.6. It seemed to quit about 80 to 90 % through the parity. Took a few times to get it done. Made sure to have reconstruct write on to speed it up too. Haven't seen the issue again though. Quote Link to comment
JorgeB Posted March 22 Share Posted March 22 17 minutes ago, techystreamer said: How do I reverrse the echo command or remove the blacklist on the amdgpu? Delete that file from the flash drive. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.