olympia Posted March 6 Share Posted March 6 Currently, I'm in the process of upgrading to larger disks and subsequently phasing out smaller ones (replacing 2x8TB drives with a 18TB drive). The procedure I'm following is as follows: 1) Swapping one of the 8TB drives with the 18TB drive and rebuilding from parity. 2) Conducting a disk to disk transfer, copying all data from the second 8TB drive to the 18TB drive. 3) Removing the second 8TB from the array 4) Applying "New Config" tool, since there is no other way to remove disk from the array 5) Rebuilding parity I'm currently in the third cycle of this process and I'm surprised to find that I've lost all my disk shares and disk settings during the "New Config" phase, despite selecting the option to preserve assignments. While the disk assignments (positions) remain intact, all disk shares are disabled by Unraid as a result of "New Config". Moreover, all settings configured under settings/disk are lost. Strangely, I even have to reinitialize the user shares, meaning although the user shares exist, I can't write anything to them until I modify a setting within the user share, click apply, revert the change, and then reapply to restore the desired configuration. Is this behavior intentional? It's been a while since I last used "New Config," but I don't recall it wiping all settings in this manner. Quote Link to comment
itimpi Posted March 6 Share Posted March 6 9 minutes ago, olympia said: Is this behavior intentional? It's been a while since I last used "New Config," but I don't recall it wiping all settings in this manner. As far as I know this has always been the behaviour. Whether it can be made more 'intelligent' when you elect to keep assignments I have no idea. Quote Link to comment
olympia Posted March 6 Author Share Posted March 6 I'm not so sure about this - I probably would have noticed it earlier. Recalling the adjustments I made from the default settings wasn't trivial. I couldn't even realize which settings had been wiped out. I had to go through backups to retrieve my disk settings and recreate all the disk shares along with their permission settings. ...and now this is the third time in a raw I'm going through this process, however, at least I now recall the settings and don't need to look at the backups. It would be fantastic if removing a disk didn't entail all of that. The first time, I couldn't even understand why my array wasn't auto-starting after a reboot or why the disks weren't spinning down, until I realized that all these settings had been reset. Not to mention the disk shares disappearing or user shares not working. Quote Link to comment
JorgeB Posted March 6 Share Posted March 6 This is normal, but starting with v6.13 a new config will reset basically only the assignments. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.