rcmpayne Posted March 20 Share Posted March 20 Hello All, I was looking at my server logs today, and they seem to be full of the following. While doing a few searches and commands, it appears to be related to my Flash USB boot drive. Any ideas what this may be, as it appears that my USB drive was replaced not long ago? Mar 19 19:48:17 Server kernel: ata1: limiting SATA link speed to 1.5 Gbps Mar 19 19:48:18 Server kernel: ata1: SATA link down (SStatus 0 SControl 310) Mar 19 19:48:18 Server kernel: ata1: limiting SATA link speed to 1.5 Gbps Mar 19 19:48:19 Server kernel: ata1: SATA link down (SStatus 0 SControl 310) Mar 19 19:48:19 Server kernel: ata1: limiting SATA link speed to 1.5 Gbps Mar 19 19:48:20 Server kernel: ata1: SATA link down (SStatus 0 SControl 310) root@Server:~# ls -l /sys/class/ata_port/ total 0 lrwxrwxrwx 1 root root 0 Mar 4 19:41 ata1 -> ../../devices/pci0000:00/0000:00:1f.2/ata1/ata_port/ata1/ root@Server:~# ls -l /dev/disk/by-path total 0 lrwxrwxrwx 1 root root 9 Mar 4 19:41 pci-0000:00:1d.7-usb-0:3:1.0-scsi-0:0:0:0 -> ../../sda lrwxrwxrwx 1 root root 10 Mar 4 19:41 pci-0000:00:1d.7-usb-0:3:1.0-scsi-0:0:0:0-part1 -> ../../sda1 root@Server:~# ls -l /dev/disk/by-id total 0 lrwxrwxrwx 1 root root 9 Mar 4 19:41 usb-Kingston_DataTraveler_3.0_408D5CE4B641B541295B036A-0:0 -> ../../sda lrwxrwxrwx 1 root root 10 Mar 4 19:41 usb-Kingston_DataTraveler_3.0_408D5CE4B641B541295B036A-0:0-part1 -> ../../sda1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.1.74-Unraid] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sda: Unknown USB bridge [0x0951:0x1666 (0x110)] Please specify device type with the -d option. Use smartctl -h to get a usage summary server-diagnostics-20240319-2346.zip Quote Link to comment
Solution JorgeB Posted March 20 Solution Share Posted March 20 ATA1 is not the flash drive, it should be the device connected to first motherboard SATA port. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.