amorsy Posted March 28 Share Posted March 28 (edited) Dear Unraid Community, I have HP ML110 Gen 7 - E3 1220 - 4GB RAM, I'll be upgrading the CPU/RAM to 1280/16 RAM. ( parts requested, awaiting arrival ). but until then i have connected my HDDs as following : ( i know i'm using green HDDs, but all of these HDDs are brand new ) parity sync takes too long (2 days, 8 hours) with speed of 20 Mbps . which is very slow. I have attached the diagnostics. can you please help me diagnose what is the issue and how can i fix it ? Best Regards. homenas-diagnostics-20240329-0149.zip Edited March 28 by amorsy Quote Link to comment
Solution JorgeB Posted March 29 Solution Share Posted March 29 Nothing obvious in the logs, check to see if there's a write cache option in the BIOS, if yes set it to enabled, you can also run a test with the diskspeed docker to confirm disks are performing OK. 1 Quote Link to comment
amorsy Posted March 29 Author Share Posted March 29 2 hours ago, JorgeB said: Nothing obvious in the logs, check to see if there's a write cache option in the BIOS, if yes set it to enabled, you can also run a test with the diskspeed docker to confirm disks are performing OK. Thanks A lot @JorgeB , I have changed the following settings: SATA ( from Legacy to AHCI ) Write Cache - Enable ( before it was disabled ) now getting 150 Mb/s Thanks again ❤️ 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.