stephenmoore33 Posted August 23 Share Posted August 23 Several months back, I was troubleshooting an Unraid issue and ended up resetting my BIOS settings to default. Fast forward to now, my server works as expected. Except after a reboot. When I reboot my server, it does not immediately boot into my Unraid flash drive. Instead, will sit in a blank-black screen or immediately go into the BIOS. The only way to fix it is to unplug the Unraid flash drive, and plug into a different USB port. I'm sure it's a simple setting somewhere in my BIOS, but I cannot figure it out and hope someone might have a suggestion for me. Each and every time after a clean shut down or reboot. It does not matter the USB port. MOBO: MSI MAG Z690 TOMAHAWK WIFI ATX LGA1700 Motherboard Thank you, Quote Link to comment
stephenmoore33 Posted August 23 Author Share Posted August 23 15 minutes ago, JonathanM said: Try disabling fast boot. Thanks for the reply. However, FastBoot is disabled already. Quote Link to comment
JonathanM Posted August 23 Share Posted August 23 And you've tried all the different USB port modes in BIOS? Quote Link to comment
stephenmoore33 Posted August 23 Author Share Posted August 23 5 minutes ago, JonathanM said: And you've tried all the different USB port modes in BIOS? Can you please elaborate a little more? I've tried with and without Legacy USB support enabled. Also, all USB ports are enabled in the BIOS. Quote Link to comment
JonathanM Posted August 23 Share Posted August 23 7 minutes ago, stephenmoore33 said: Can you please elaborate a little more? Different motherboards have different settings exposed, I don't know what options you have available. Exhaustively go through each CMOS item and subitem, sometimes advanced settings are hidden under sub menus. Quote Link to comment
Solution Veah Posted August 24 Solution Share Posted August 24 Some things to try: Disable secure boot Disable TPM 2.0 Disable CSM Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.