I was getting Execution Error 403 specifically for Plex and Tautullia only. I stopped everything, did a reboot, it was saying my nvme1n1 was missing. I shut down again, unplugged and replugged in the nvme1n1 (didn't notice any connection issues), rebooted, and everything is functioning... but... my log is filling with errors. What do they mean and what do I need to do?

syslog.txt

Both pool devices dropped offline in the past, run a correcting scrub and post the results.

23 minutes ago, JorgeB said:

Both pool devices dropped offline in the past, run a correcting scrub and post the results.

Can you provide some guidance on how to do that? i've never done a correcting scrub.

Click on the first pool device, scroll down to the scrub section, check the box to correct any errors, click scrub.

9 minutes ago, JorgeB said:

Click on the first pool device, scroll down to the scrub section, check the box to correct any errors, click scrub.

thanks! just finished.

syslog.txt

Sorry if I wasn't clear, by results I meant what you see in the scrub window after it's done.

26 minutes ago, JorgeB said:

Sorry if I wasn't clear, by results I meant what you see in the scrub window after it's done.

Have you done memtest recently?

All errors were corrected, that's good, now reset the stats and keep monitoring the pool, the main issue is that the NVMe devices are dropping offline.

9 hours ago, JorgeB said:

All errors were corrected, that's good, now reset the stats and keep monitoring the pool, the main issue is that the NVMe devices are dropping offline.

edit: re-read through it again and figured it out. thanks!

Edited February 14, 20251 yr by shek

9 hours ago, trurl said:

Have you done memtest recently?

how would i go about doing that? never done one.

memtest is on the boot menu