ednigma Posted October 5, 2012 Share Posted October 5, 2012 Did a quick search and couldn't find anything specific to this Trying to install SimpleFeatures on a testbuild to try it out. Made a new flash with v5.0-rc8a with unmenu. Booted and everything seems fine. Downloaded SimpleFeatures zip files and made a plugins dir inside the config dir, copied all files form the unziped SimpleFeatures file. When I rebooted, I see the following: wget: unable to resolve host address 'unraid-simplefeatures.googlecode.com' 12 times - one for each plg file. I pinged unraid-simplefeatures.googlecode.com from the server and got a responses from 74.125.142.82 Upon reboot, it should automatically download all the necessary files and install them right? There's a simpleFeatures directory under plugins, but it is empty. Ok, tried manual install of the core pkg and it seems to work. Do I have to manually invoke installplg for each plugin? Thanks Ed Quote Link to comment
mumus Posted October 5, 2012 Share Posted October 5, 2012 Not quite sure what's been changed lately but I had the exact same issue you were describing. Solved or rather circumvented it using the following telnet command: installplg /boot/config/plugins/simpleFeatures.core.webGUI-1.0.5-noarch-1.plg Off course you will have already copied the plg file in directory /boot/config/plugins/ before running the code above. Hope this helps while real experts find a real fix. Quote Link to comment
bonienl Posted October 6, 2012 Share Posted October 6, 2012 Next version will have a workaround to allow installation of the plugins upon reboot. Problem lies within unraid itself; the network may not be fully operational yet when plugins need to be downloaded (depends on your network settings). Note that a local copy is placed on your flash, so once a manual install is performed then a next reboot will read the local copy instead and does not initiate a remote download. Quote Link to comment
ednigma Posted October 7, 2012 Author Share Posted October 7, 2012 Thanks guys, As noted above, I manually installed and it was able to download the pkg and install successfully and I see the local copy on the flash. The confusing thing was I would log in as root (directly on the server, not telnet) and was able to ping the address on googlecode. Regards Quote Link to comment
opentoe Posted October 8, 2012 Share Posted October 8, 2012 Maybe put a pause in the GO file.... Quote Link to comment
bonienl Posted October 14, 2012 Share Posted October 14, 2012 Maybe put a pause in the GO file.... That wouldn't help! Plugin files (*.plg) are processed outside the GO file, in fact they are executed before the processing of the GO file takes place. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.