Res74 Posted March 14, 2013 Share Posted March 14, 2013 Hello, So today I added in another disk to my array (disk7) after preclearing. It worked correctly and added into the array without issues. I then noticed a few new SimpleFeatures plugins (I was on 1.0.5 and noticed 1.0.11) so I naturally updated. I rebooted my server to install all the new plugins and now all my shares do not show. I checked on disk1, disk2, and disk3 and inside them my shares show. I looked through a few forum posts and have done the following: -shutdown and reboot (hard and soft) -reenable SMB -remove simplefeatures add-on -upgrade unraid server from 5.0beta12 to 5.0rc11 None of this has fixed the problem, so I need the great community help! What I find odd is that a share I created called plex that is basically a place to install apps, still works. It is only my "Movies" and "TV Shows" virtual shares that are gone. I also ran the below: -ps -ef | grep shfs (which came back with only the below line:) root 30109 28025 0 18:04 pts/0 00:00:00 grep shfs -ls -lR /mnt/user (which shows the below to sum up:) /mnt/user: total 0 drwxr-xr-x 6 root root 0 2013-03-14 17:49 plex/ Attached is also a syslog. Thanks in advanced! syslog.zip Link to comment
trurl Posted March 15, 2013 Share Posted March 15, 2013 Your shares configurations are stored in /boot/config/shares/*.cfg Do you still have these? Link to comment
Res74 Posted March 15, 2013 Author Share Posted March 15, 2013 They are all still there, however I did not know that so thank you. I verified all the settings in each one CFG file is correct. Link to comment
Res74 Posted March 15, 2013 Author Share Posted March 15, 2013 So besides banging my head against a wall, I've spent the last 5 hours going through all my old documents, backups, and usbs and have found a "recent" backup of my flash configuration file. I copied the "broken" flash onto another computer and rared it and put on my backup flash and my shares are now there. I will say I still have no idea what happened, but I will be starting to backup my flash drive before I make any new changes from here on out. Link to comment
BobPhoenix Posted March 15, 2013 Share Posted March 15, 2013 I will say I still have no idea what happened, but I will be starting to backup my flash drive before I make any new changes from here on out. I have a script that runs daily on a Windows PC that backs up my unRAID flash drives - which is probably overkill but then if I forget to do it when I upgrade I at least have a backup from previous day. Actually since I am putting a date in the file name I have one for every day since I started using it about 3 months ago - so definately overkill. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.