Fuggin Posted November 12, 2013 Share Posted November 12, 2013 Dummy me put in 2 HDDs in my array. 1 was intended as a parity drive. The other was intended to replace a possible bad HDD. The parity install went fine. When I went to disable the other HDD, I get the "drive is missing" notice. The 2nd HDD has no data on it. How do I get around this? Link to comment
Fuggin Posted November 12, 2013 Author Share Posted November 12, 2013 Would this FAQ be the way to go? http://lime-technology.com/wiki/index.php/FAQ_remove_drive 1. Just move the data off the bad HDD to the new HDD via MC 2. Disable bad HDD. 3. Create new config? Link to comment
dgaschk Posted November 12, 2013 Share Posted November 12, 2013 Yes, but run a parity check first and last. Link to comment
Fuggin Posted November 12, 2013 Author Share Posted November 12, 2013 Thanks...I did do a parity check first, so I will do a parity check after I create the new config. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.