RoBe00297 Posted October 17, 2015 Share Posted October 17, 2015 Hey guys, So I seen the video linustechtips did with unRAID and it was basically everything I wanted. So I have it downloaded and made bootable on a 32 GB Flashdrive everything started good and then I noticed that I forgot to plug in my second HDD it didn't give me an option to "shutdown" in the GUI so I forced shutdown, and now that everything is plugged in and booted again I cant get to the WebGUI anymore. I have restarted my router and anything connected to my router and I have tried to just use a new router plugged into just the Server and into another laptop still nothing works! Any help would be wonderful!! Also I attempted to save the Diagnostics file but I cant find it anywhere on the flashdrive EDIT: The hardware i'm using is Motherboard: Gigabyte GA-Z77X-UD5H RAM: G.Skill 4GB DDR3-2133 CPU: Celeron G1620 HDD: 2X Toshiba 350GB Link to comment
itimpi Posted October 17, 2015 Share Posted October 17, 2015 Hey guys, So I seen the video linustechtips did with unRAID and it was basically everything I wanted. So I have it downloaded and made bootable on a 32 GB Flashdrive everything started good and then I noticed that I forgot to plug in my second HDD it didn't give me an option to "shutdown" in the GUI You have to stop the array for the Shutdown button to become available. There is a plugin that give you a single button to do both the stop and shutdown. so I forced shutdown, and now that everything is plugged in and booted again I cant get to the WebGUI anymore. I have restarted my router and anything connected to my router and I have tried to just use a new router plugged into just the Server and into another laptop still nothing works! Any help would be wonderful!! No idea what could be causing this. Restarting after a forced shutdown should be no different to a normal start as far as the getting to the GUI is concerned. Also I attempted to save the Diagnostics file but I cant find it anywhere on the flashdrive If it was successfully created it will be in the 'logs' folder on the flash drive. Link to comment
RoBe00297 Posted October 17, 2015 Author Share Posted October 17, 2015 Also I attempted to save the Diagnostics file but I cant find it anywhere on the flashdrive If it was successfully created it will be in the 'logs' folder on the flash drive. There is no file. This is the only things on the flashdrive. (Hidden files are enabled) http://prntscr.com/8sauf2 Link to comment
itimpi Posted October 17, 2015 Share Posted October 17, 2015 Also I attempted to save the Diagnostics file but I cant find it anywhere on the flashdrive If it was successfully created it will be in the 'logs' folder on the flash drive. There is no file. This is the only things on the flashdrive. (Hidden files are enabled) http://prntscr.com/8sauf2 In that case it does not look as though the creation of the diagnostics file completed. I think it is initially created in RAM and then moved to the flash drive (although I could be wrong about that). Were you trying to create it via the GUI (Tools->Diagnostics) or the command line (via 'diagnostics' command). Link to comment
RoBe00297 Posted October 17, 2015 Author Share Posted October 17, 2015 Also I attempted to save the Diagnostics file but I cant find it anywhere on the flashdrive If it was successfully created it will be in the 'logs' folder on the flash drive. There is no file. This is the only things on the flashdrive. (Hidden files are enabled) http://prntscr.com/8sauf2 In that case it does not look as though the creation of the diagnostics file completed. I think it is initially created in RAM and then moved to the flash drive (although I could be wrong about that). Were you trying to create it via the GUI (Tools->Diagnostics) or the command line (via 'diagnostics' command). As I cant get into the GUI its via the command line. It said it completed successfully though Link to comment
RoBe00297 Posted October 17, 2015 Author Share Posted October 17, 2015 So I think I solved it. I unplugged the HHDs and it allowed me into the WebGUI. So I'm going to boot into my other computer and fresh wipe the two (even though there's nothing on them) Hard Drives that will be connected to the Server. And Ill report back if it works or not! Link to comment
ljh89 Posted October 17, 2015 Share Posted October 17, 2015 Is your MB not defaulting to booting the HDD when you plug those in instead of the flash drive. Every time I alter any drives in mine I have to go back and change the order Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.