MethodCall Posted April 27, 2016 Share Posted April 27, 2016 Here's what happens: [*]Start (or restart) Windows 10 VM [*]VM will enter a paused state, usually after only a few minutes [*]VM log shows "domain is tainted" errors [*]Lay down [*]Try not to cry [*]Cry a lot So far, I haven't been able to track down any sort of concrete solution or, really, even so much as a hypothesis as to what the hell is going on with this. I am, unfortunately, very much out of my depth with this issue and I don't know what to do next so I am completely dead in the water insofar as the functionality of this VM is concerned. I've included my XML configuration and VM Log below. <domain type='kvm'> <name>Windows 10 Pro</name> <uuid>6fcf3a30-7c58-cd7c-9aa5-46d392660fed</uuid> <metadata> <vmtemplate name="Custom" icon="windows.png" os="windows"/> </metadata> <memory unit='KiB'>6291456</memory> <currentMemory unit='KiB'>6291456</currentMemory> <memoryBacking> <nosharepages/> <locked/> </memoryBacking> <vcpu placement='static'>2</vcpu> <cputune> <vcpupin vcpu='0' cpuset='2'/> <vcpupin vcpu='1' cpuset='3'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-2.3'>hvm</type> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> </hyperv> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='2' threads='1'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/qemu-system-x86_64</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user0/vDisks/Windows 10 Pro/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/ISOs/windows10.iso'/> <target dev='hda' bus='ide'/> <readonly/> <boot order='2'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/ISOs/virtio-win-0.1.113.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:ba:ce:15'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/Windows 10 Pro.org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' websocket='-1' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='vmvga' vram='16384' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </memballoon> </devices> </domain> Domain id=2 is tainted: high-privileges Domain id=2 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) qemu: terminating on signal 15 from pid 2140 2016-04-27 05:03:49.233+0000: shutting down 2016-04-27 05:04:01.513+0000: starting up libvirt version: 1.2.18, qemu version: 2.3.0 Domain id=3 is tainted: high-privileges Domain id=3 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) qemu: terminating on signal 15 from pid 2140 2016-04-27 05:04:55.473+0000: shutting down 2016-04-27 05:05:28.108+0000: starting up libvirt version: 1.2.18, qemu version: 2.3.0 Domain id=4 is tainted: high-privileges Domain id=4 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) qemu: terminating on signal 15 from pid 2140 2016-04-27 05:06:58.700+0000: shutting down 2016-04-27 17:57:18.838+0000: starting up libvirt version: 1.2.18, qemu version: 2.3.0 Domain id=5 is tainted: high-privileges Domain id=5 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) qemu: terminating on signal 15 from pid 2140 2016-04-27 18:36:02.707+0000: shutting down 2016-04-27 18:36:16.015+0000: starting up libvirt version: 1.2.18, qemu version: 2.3.0 Domain id=6 is tainted: high-privileges Domain id=6 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) qemu: terminating on signal 15 from pid 2140 2016-04-27 18:41:14.344+0000: shutting down 2016-04-27 19:24:24.002+0000: starting up libvirt version: 1.2.18, qemu version: 2.3.0 Domain id=7 is tainted: high-privileges Domain id=7 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) qemu: terminating on signal 15 from pid 2140 2016-04-27 19:27:46.949+0000: shutting down Motherboard: Asus Maximus Gene VII CPU: Intel i5-4440S RAM: 8GB 2133Mhz DDR3 Anybody have any ideas? Link to comment
csmccarron Posted April 27, 2016 Share Posted April 27, 2016 Wierd, I am having the exact same issue. My VM was running fine then all of a sudden the VM appears to lock up and I have to force restart. Are you using 6.1 or 6.2 Beta? Link to comment
scytherbladez Posted April 27, 2016 Share Posted April 27, 2016 Tried disabling sleep/standby in the Windows VM? That's the one thing which made my Win10 VM's enter pause state. Link to comment
csmccarron Posted April 28, 2016 Share Posted April 28, 2016 Went in an disabled sleep mode. I had missed a few places. Link to comment
csmccarron Posted April 28, 2016 Share Posted April 28, 2016 Sleep mode disabled, still stopped. Model: unRaid 6.2 Beta M/B: ASUSTeK Computer INC. - Z8P(N)E-D12(X) CPU: Intel® Xeon® CPU X5690 @ 3.47GHz HVM: Enabled IOMMU: Enabled Cache: 384 kB, 1536 kB, 12288 kB Memory: 32768 MB (max. installable capacity 96 GB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 100Mb/s, Full Duplex, mtu 1500 eth1: not connected Kernel: Linux 4.4.6-unRAID x86_64 OpenSSL: 1.0.2g 2016-04-28 00:15:04.568+0000: starting up libvirt version: 1.3.1, qemu version: 2.5.1, hostname: mccserverur01 LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/ QEMU_AUDIO_DRV=none /usr/local/sbin/qemu -name csmccarronwx00 -S -machine pc-i440fx-2.5,accel=kvm,usb=off,mem-merge=off -cpu host -m 10752 -realtime mlock=on -smp 16,sockets=1,cores=8,threads=2 -uuid 5ee2b02b-9d90-d9c4-b414-8f8ad0da3b4c -nographic -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/domain-csmccarronwx00/monitor.sock,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime,driftfix=slew -global kvm-pit.lost_tick_policy=discard -no-hpet -no-shutdown -boot strict=on -device ich9-usb-ehci1,id=usb,bus=pci.0,addr=0x7.0x7 -device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x7 -device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pci.0,addr=0x7.0x1 -device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pci.0,addr=0x7.0x2 -device ahci,id=sata0,bus=pci.0,addr=0x3 -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4 -ostdev0,x-vga=on,bus=pci.0,addr=0x5 -device vfio-pci,host=00:1b.0,id=hostdev1,bus=pci.0,addr=0x6 -device vfio-pci,host=0a:00.1,id=hostdev2,bus=pci.0,addr=0x8 -device vfio-pci,host=0c:00.0,id=hostdev3,bus=pci.0,addr=0x9 -device usb-host,hostbus=6,hostaddr=2,id=hostdev4 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xa -msg timestamp=on Domain id=3 is tainted: high-privileges Domain id=3 is tainted: host-cpu char device redirected to /dev/pts/0 (label charserial0) VM XML <domain type='kvm' id='3'> <name>csmccarronwx00</name> <uuid>5ee2b02b-9d90-d9c4-b414-8f8ad0da3b4c</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>11010048</memory> <currentMemory unit='KiB'>11010048</currentMemory> <memoryBacking> <nosharepages/> <locked/> </memoryBacking> <vcpu placement='static'>16</vcpu> <cputune> <vcpupin vcpu='0' cpuset='8'/> <vcpupin vcpu='1' cpuset='9'/> <vcpupin vcpu='2' cpuset='10'/> <vcpupin vcpu='3' cpuset='11'/> <vcpupin vcpu='4' cpuset='12'/> <vcpupin vcpu='5' cpuset='13'/> <vcpupin vcpu='6' cpuset='14'/> <vcpupin vcpu='7' cpuset='15'/> <vcpupin vcpu='8' cpuset='16'/> <vcpupin vcpu='9' cpuset='17'/> <vcpupin vcpu='10' cpuset='18'/> <vcpupin vcpu='11' cpuset='19'/> <vcpupin vcpu='12' cpuset='20'/> <vcpupin vcpu='13' cpuset='21'/> <vcpupin vcpu='14' cpuset='22'/> <vcpupin vcpu='15' cpuset='23'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-i440fx-2.5'>hvm</type> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough'> <topology sockets='1' cores='8' threads='2'/> </cpu> <clock offset='localtime'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/ISO/Windows10Pro_TH2.iso'/> <backingStore/> <target dev='hda' bus='sata'/> <readonly/> <boot order='2'/> <alias name='sata0-0-0'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/ISO/virtio-win-0.1.117.iso'/> <backingStore/> <target dev='hdb' bus='sata'/> <readonly/> <alias name='sata0-0-1'/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <disk type='block' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source dev='/dev/disk/by-id/ata-SanDisk_Ultra_II_480GB_161002808956'/> <backingStore/> <target dev='hdc' bus='sata'/> <boot order='1'/> <alias name='sata0-0-2'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'> <alias name='pci.0'/> </controller> <controller type='sata' index='0'> <alias name='sata0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:e9:4c:d4'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/0'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/0'> <source path='/dev/pts/0'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-csmccarronwx00/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <hostdev mode='subsystem' type='pci' managed='yes' xvga='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0a' slot='0x00' function='0x0'/> </source> <alias name='hostdev0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x00' slot='0x1b' function='0x0'/> </source> <alias name='hostdev1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0a' slot='0x00' function='0x1'/> </source> <alias name='hostdev2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x0c' slot='0x00' function='0x0'/> </source> <alias name='hostdev3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x1b1c'/> <product id='0x1c00'/> <address bus='6' device='2'/> </source> <alias name='hostdev4'/> </hostdev> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/> </memballoon> </devices> </domain> Link to comment
CHBMB Posted April 28, 2016 Share Posted April 28, 2016 I'm no VM expert, but try not to add all the CPU cores to the guest. If you do then afaik when the host needs some CPU power it'll sacrifice the guest for it. Might be worth a shot. EDIT: Host CPU starts with 0 I think, I never allocate 0 to a guest. Link to comment
csmccarron Posted May 21, 2016 Share Posted May 21, 2016 I actually resolved this issue by doing the following. 1. Got rid of the GTX-680 gpu and replaced with a GTX-970 gpu that supports uefi. The GTX-680 did not support UEFI. 2. Reinstalled the VM using the OVMF loader. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.