csmccarron

I have not yet upgraded to 6.12.4 due to the scary release notes. Is this upgrade safe or can it harm my setup? I do have bridging enabled. I also have bonding (eth0 & eth1) enabled. Thank you

To set the path for my bash shell for Putty I have custom permissions on some of my groups that I use for file sharing I have some custom scripts that I install in my /usr/local/bin folder that I use for maintenance tasks

PSU: CORSAIR AXi Series AX1200i Digital 1200W 80 PLUS Could not get the echo for unbind or bind to work. root@mccserverur01:~# echo -n "2-4:1.0" > /sys/bus/usb/drivers/cp210x/unbind bash: echo: write error: No such device root@mccserverur01:~# echo -n "2-4:1.0" > /sys/bus/usb/drivers/cp210x/bind bash: echo: write error: No such device root@mccserverur01:~# ls -l /sys/bus/usb/drivers/cp210x total 0 lrwxrwxrwx 1 root root 0 Jul 23 16:09 2-1.4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/ -rw------- 1 root root 4096 Jul 23 16:11 bind lrwxrwxrwx 1 root root 0 Jul 23 16:09 module -> ../../../../module/usbserial/ --w------- 1 root root 4096 Jul 23 16:09 uevent --w------- 1 root root 4096 Jul 23 16:17 unbind In order to get cpsumoncli to work I had to make it executable. root@mccserverur01:/usr/local/bin# cpsumon/cpsumoncli /dev/ttyUSB0 bash: cpsumon/cpsumoncli: Permission denied root@mccserverur01:/usr/local/bin# cd cpsumon root@mccserverur01:/usr/local/bin/cpsumon# ls -l total 16 -rw-r--r-- 1 root root 15760 Jun 15 08:01 cpsumoncli drwxr-xr-x 2 root root 60 Jun 15 08:01 libcpsumon/ root@mccserverur01:/usr/local/bin/cpsumon# chmod 755 cpsumoncli root@mccserverur01:/usr/local/bin/cpsumon# ls -l total 16 -rwxr-xr-x 1 root root 15760 Jun 15 08:01 cpsumoncli* drwxr-xr-x 2 root root 60 Jun 15 08:01 libcpsumon/ It is now working, except for getting 5v & 3v data. Thank you

After installing Uassigned Devices Plus and Unassigned Devices Preclear, I was able to get the drive back to an unformatted and clear disk. I first ran the Preclear, then using Uassigned Device Plus cleared the partitions.

I am having a similar issue. I have a Corsair AXi power supply. root@mccserverur01:/dev# lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M |__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 4: Dev 4, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M |__ Port 6: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 6: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 6: Dev 5, If 2, Class=Human Interface Device, Driver=usbhid, 12M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M |__ Port 3: Dev 4, If 0, Class=Hub, Driver=hub/5p, 480M |__ Port 1: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M |__ Port 1: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M root@mccserverur01:/dev# lsusb Bus 002 Device 005: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 004: ID 1b1c:1c00 Corsair Controller for Corsair Link Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and Mouse Bus 001 Device 004: ID 046b:ff01 American Megatrends, Inc. Virtual Hub Bus 001 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@mccserverur01:/usr/local/bin/cpsumon# cpsumoncli /dev/ttyUSB0 Corsair AXi Series PSU Monitor (c) 2014 Andras Kovacs - [email protected] ------------------------------------------- Dongle name: USB to SMB Bridge (Firmware by Ross Fosler) Dongle version: 5.3 Let me know if you need anything else. Thank you mccserverur01-diagnostics-20230723-1110.zip

So I found Unassigned Devices Preclear. I am running this now on the disk, if this works I will mark it as solved.

The disk below was an old parity disk that for some reason disabled. I ran a smart check and the disk is ok. I have attached a spare disk to replace the parity disk and that is rebuilding now. I would like to know how to remove the configuration so this disk becomes a disk with no format on it. How do you unformat an unused array disk? Thank you

Solved. Followed this post and was able to resolve the issue. I was actually having this issue with Firefox on the unRaid console after rebooting the server.

After upgrading to 6.11 everytime I reboot unRaid it comes up with the array not started. So I start the array and the UI reports that the array is not started. All of my dockers are working and both of my VM's are working properly. My drives are also working properly. I am hoping this is an easy fix. Thank you diagnostics-20230205-1600.zip

How come my plex docker no longer has a Remote Access setting? All it has is the online PLEX media BS.

Server has been stable, no lock ups or crashes. If anything changes I will update this tread. The only issue I have with the plugin is the "Graphql is offline" error.

I am off this week and intown, so I am going to enable the Flash Backup and see what happens. I am running UnRaid 6.9.2 and my My Servers plugin is up-to-date. As of right now the Flash Backup is Active. Due to a recent power outage my server has been up for Uptime 7 days 9 hours 38 minutes. Hopefully it will not lockup.

I have everything enabled except for the online backup and my server has not crashed. I need to enable the online backup. When I first installed the plugin the last entry in the log file was backup related and the server locked up. Since disabling the online backup my server has been stable.

Server has been up now for 1 Month 20 Days 21 Hours 14 Minutes without crashing. Just enabled Allow Remote Access and will try this for a few weeks. The next step will be to turn the online backup on.

Server has been up now for 26 days and 13 hours. I have had the MyServer plugin install but not signed in now since September 5 2021 with no issues. I am going to sign in but leave the backup disabled and see what happens. I am also leaving Remote access disabled for now.

So my server has been up now for 17 days, no crash. So what do you want me to enable first? For now I am just going to install the plugin and leave that not signed in for about 7 days. After that I will sign in and disable the backup.

Was wondering what would happen if internet was lost during the backup? Would that cause the system to freeze or something? I will enable this when I get back from my trip and post my finding here. Thank you

6 days and counting with no My Servers plugin and no freezes. Last thing that happed prior to freezing up: Aug 19 00:20:13 mccserverur01 flash_backup: adding task: /usr/local/emhttp/plugins/dynamix.my.servers/scripts/UpdateFlashBackup.php update First entry after I reset the server: Aug 19 19:11:34 mccserverur01 kernel: microcode: microcode updated early to revision 0x71a, date = 2020-03-24 log_prior_to_freeze.log

The monitor that was attached only supported 1366 x 768@60 Hz and unRaid booted to a resolution greater than 1920x1080. Is there anyway to fix the resolution so it always starts at 1920x1080? last_boot.log

Bump

So there is no way to force it to use a specific resolution everytime it boots?

I have the My Servers plugin uninstalled currently. Server has been running for 3 days 22 hours. So far no more issues but it needs to run longer to verify that it is stable. In the past, I have been able to run the server without a reboot between updates, 100+ days without issues. I have attached the complete log file. syslog

Bump

That was the last thing that happed before it locked up. This is when I rebooted the server later the same day. I have the log mirrored to the USB boot drive. Aug 19 19:11:34 mccserverur01 kernel: microcode: microcode updated early to revision 0x71a, date = 2020-03-24

Sometimes when I reboot my server it comes up in a video resolution not supported by the monitor. I have two questions. 1. Is there a way to fix the video resolution so it always starts up using the same resolution? 2. Once the server is started how do you change the resolution of the screen without rebooting the server? Thanks in advance.