System log blown up with bro/eth0 issue

[BrianL62]

System log has been blown up with this this error. I have started in the safe mode also and its still there. I have never seen this before, any issues I should be worried about? 

 

Diagnostic attached.

 

 

May 29 02:49:03 Tower_2 kernel: br0: received packet on eth0 with own address as source address
May 29 02:49:04 Tower_2 kernel: br0: received packet on eth0 with own address as source address
May 29 02:51:06 Tower_2 kernel: br0: received packet on eth0 with own address as source address
May 29 02:51:09 Tower_2 kernel: br0: received packet on eth0 with own address as source address
May 29 02:51:12 Tower_2 kernel: br0: received packet on eth0 with own address as source address
May 29 02:53:12 Tower_2 kernel: br0: received packet on eth0 with own address as source address
May 29 02:53:12 Tower_2 kernel: br0: received packet on eth0 with own address as source address
May 29 02:53:19 Tower_2 kernel: br0: received packet on eth0 with own address as source address

tower_2-diagnostics-20170529-0827.zip

[bonienl]

Use a different bonding method. Likely you have now "round-robin", make this "active-standby" instead.

 

See network settings.

 

Edited May 29, 2017 by bonienl

[BrianL62]

Bonding was set to no, changed it to "active standby". Monitoring now to see if it returns.

Sent from my HTC 10 using Tapatalk

[BrianL62]

Now with bonding set to "active standby", I'm getting this - just changed from "eth0" to "bond0". This goes away when I remove the "Enable Bridging" of course......

 

May 30 07:17:08 Tower_2 kernel: br0: received packet on bond0 with own address as source address
May 30 07:19:17 Tower_2 kernel: br0: received packet on bond0 with own address as source address
May 30 07:21:27 Tower_2 kernel: br0: received packet on bond0 with own address as source address
May 30 07:23:31 Tower_2 kernel: br0: received packet on bond0 with own address as source address
May 30 07:25:28 Tower_2 kernel: br0: received packet on bond0 with own address as source address
May 30 07:27:34 Tower_2 kernel: br0: received packet on bond0 with own address as source address

[Weavus]

Having the same issue with single NIC, bonding = no, bridging = yes