BrianL62 Posted May 29, 2017 Share Posted May 29, 2017 System log has been blown up with this this error. I have started in the safe mode also and its still there. I have never seen this before, any issues I should be worried about? Diagnostic attached. May 29 02:49:03 Tower_2 kernel: br0: received packet on eth0 with own address as source address May 29 02:49:04 Tower_2 kernel: br0: received packet on eth0 with own address as source address May 29 02:51:06 Tower_2 kernel: br0: received packet on eth0 with own address as source address May 29 02:51:09 Tower_2 kernel: br0: received packet on eth0 with own address as source address May 29 02:51:12 Tower_2 kernel: br0: received packet on eth0 with own address as source address May 29 02:53:12 Tower_2 kernel: br0: received packet on eth0 with own address as source address May 29 02:53:12 Tower_2 kernel: br0: received packet on eth0 with own address as source address May 29 02:53:19 Tower_2 kernel: br0: received packet on eth0 with own address as source address tower_2-diagnostics-20170529-0827.zip Quote Link to comment
bonienl Posted May 29, 2017 Share Posted May 29, 2017 (edited) Use a different bonding method. Likely you have now "round-robin", make this "active-standby" instead. See network settings. Edited May 29, 2017 by bonienl Quote Link to comment
BrianL62 Posted May 29, 2017 Author Share Posted May 29, 2017 Bonding was set to no, changed it to "active standby". Monitoring now to see if it returns.Sent from my HTC 10 using Tapatalk Quote Link to comment
BrianL62 Posted May 30, 2017 Author Share Posted May 30, 2017 Now with bonding set to "active standby", I'm getting this - just changed from "eth0" to "bond0". This goes away when I remove the "Enable Bridging" of course...... May 30 07:17:08 Tower_2 kernel: br0: received packet on bond0 with own address as source addressMay 30 07:19:17 Tower_2 kernel: br0: received packet on bond0 with own address as source addressMay 30 07:21:27 Tower_2 kernel: br0: received packet on bond0 with own address as source addressMay 30 07:23:31 Tower_2 kernel: br0: received packet on bond0 with own address as source addressMay 30 07:25:28 Tower_2 kernel: br0: received packet on bond0 with own address as source addressMay 30 07:27:34 Tower_2 kernel: br0: received packet on bond0 with own address as source address Quote Link to comment
Weavus Posted June 2, 2017 Share Posted June 2, 2017 Having the same issue with single NIC, bonding = no, bridging = yes Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.