September 17, 20178 yr Hi, I've setup a second UnRAID server so that I can separate my files and media. But I have a problem. I've created a couple of 'Shares' but I can't view any of them from my Windows 10 machine. I have manually copied the settings from the current share I have for my files but I still can't access it! What do you suggest? What diagnostics do I need to run/upload? Thank you for your help
September 17, 20178 yr 3 minutes ago, hilljd00 said: What diagnostics do I need to run/upload? Tools - Diagnostics Would also be good for you to read through this: https://forums.lime-technology.com/topic/53172-windows-issues-with-unraid/
September 17, 20178 yr Author I can't see any of my disks or shares but I can see the server name in Windows and through the GUI
September 18, 20178 yr 11 hours ago, hilljd00 said: I can't see any of my disks or shares but I can see the server name in Windows and through the GUI Are you saying that you cannot see the shares from Windows or you cannot see them from the unRAID GUI. If it is the latter then make sure that the unRAID server is white-listed in any ad-blocker you might be running. If it is not the above, can you perhaps provide screen shots of the Settings->Global Shares page and the page for the settings for a particular share causing problems. Edited September 18, 20178 yr by itimpi
September 18, 20178 yr Just now, hilljd00 said: I have an error? No - that was me making an error because I misread one of your screen shots. Unfortunately there is not an option to delete a post once you have done that.
September 18, 20178 yr Do you see the flash share? Do you see Prometheus? Edited September 18, 20178 yr by Squid
September 20, 20178 yr Grasping at straws... Do you statically assign IPs to your servers, or use DHCP? Are you able to telnet into the servers by name, or do you need to use IPs?
September 21, 20178 yr Is windows network sharing enabled on the host where from you try to connect Can you ping the tower? by dns/ip?
September 25, 20178 yr Author On 20/09/2017 at 9:32 PM, tdallen said: Grasping at straws... Do you statically assign IPs to your servers, or use DHCP? Are you able to telnet into the servers by name, or do you need to use IPs? Everything on my network has a static IP. I can putty into both servers. I always use their IP address.
September 25, 20178 yr Author On 21/09/2017 at 1:10 AM, Thomas van Dalen said: Is windows network sharing enabled on the host where from you try to connect Can you ping the tower? by dns/ip? Yes. I can access my other devices and my shares on my other server. I can putty into both servers. I always use their IP address.
Archived
This topic is now archived and is closed to further replies.