JonMikelV Posted June 7, 2018 Share Posted June 7, 2018 I'm running 6.5.1 on an HP-XW4600 (Core 2 Duo, 8G RAM) and am getting the "Call traces found on your server" message. In the Fix Common Problems tool I also noticed an "Unclean shutdown detected of your server" message which is correct as there was an unexpected power issue a week or so ago. I tried clicking the "Acknowledge Error" button but the message hasn't gone away. I downloaded the zip file from "Tools -> Diagnostics" and have attached it below. Is there some place I can go to learn how to read these myself so I don't have to bother people here if (when) it happens again? Thanks! tower-diagnostics-20180607-1113.zip Quote Link to comment
JorgeB Posted June 7, 2018 Share Posted June 7, 2018 Just now, JonMikelV said: and am getting the "Call traces found on your server" message. May 9 11:19:15 Tower kernel: Your BIOS is broken; DMAR reported at address fed90000 returns all ones! Update your bios, ignore, or disable VT-d if not needed. Quote Link to comment
JonMikelV Posted June 7, 2018 Author Share Posted June 7, 2018 Thanks. I don't think there's an updated BIOS for this poor machine so I'll try disabling it (I am using VMs but NOT doing any direct IO - at least that I know of). Quote Link to comment
JonMikelV Posted June 7, 2018 Author Share Posted June 7, 2018 (edited) As far as I can tell, there IS actually an updated BIOS v 1.34 Rev A for my HP xw4600 Workstation, however I decided that since I'm not using VT-d it would be safer to just disable it rather than use my unRAID box to try a Linux based BIOS update that I've never done before. ? Thanks again! How I disabled VTd in my HP xw4600 BIOS (version 786F3 v1.06): - Pressed F10 on POST screen to get into Setup - Selected "Security" -> "System Security" - Highlighted "Virtualization Technology Directed I/O (VTd)" - Used the left/right arrows to select "Disable" - Pressed "F10=Accept" - Selected "File" -> "Save Changes and Exit" - Pressed "F10=Yes" (causing box to reboot) Edited June 7, 2018 by JonMikelV Quote Link to comment
JonMikelV Posted June 9, 2018 Author Share Posted June 9, 2018 On 6/7/2018 at 11:25 AM, johnnie.black said: May 9 11:19:15 Tower kernel: Your BIOS is broken; DMAR reported at address fed90000 returns all ones! Got it. That line was in the syslog.1.txt file but apparently you need to already have "skillz" to know that it's the cause of the "Call traces" message. ? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.