wisem2540 Posted July 3, 2018 Share Posted July 3, 2018 My build was based on the Supermicro SAS controller that was so popular for many years. Parity syncs have always been somewhat slow. That controller would crash occasionally and mark 3-4 drives as missing. That happened again today, so I finally swapped it for a Dell H310 right now, my parity is syncing at 33MB. It does increase after a while, sometimes. I have attached a log to see if anything jumps out. EDIT after 30mins it is now up to 125MB. Is this slow start normal? Thanks unraid-diagnostics-20180703-1720.zip Link to comment
JorgeB Posted July 4, 2018 Share Posted July 4, 2018 8 hours ago, wisem2540 said: Is this slow start normal? There could have been some array activity or some disk(s) getting slow sectors, monitor the next check. Link to comment
wisem2540 Posted July 4, 2018 Author Share Posted July 4, 2018 I was doing some looking around and realized that the drives plugged into my motherboard ports are only operating at 3G rather than 6gs. Will I noticed any Improvement if I buy another HBA? Link to comment
JorgeB Posted July 4, 2018 Share Posted July 4, 2018 SATA2 is more than enough for current hard drives, SSDs are a different story. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.