r1sk Posted January 27, 2019 Share Posted January 27, 2019 (edited) Hi, I've just upgraded my unraid setup , with a new motherboard / CPU / memory and SATA Controller (LSI card). Previously I had enough SATA connections on my board but now I had to move to a LSI Card to be able to connect all of them to my system. I've noticed that increase CRC errors only on the drives connected to the LSI card, the rest of the hard drives were ok. I did read somewhere in the forum that the cards can get hot an its a good idea to put a fan on them , I've done it and the errors are still appearing. Also in one of the threads they mentioned that it might be related to cross talk between the SATA cables, i've tried to spread them around as much as possible but since the LSI card has 2 mini-SAS connectors they can be really separated too much. I've attached the diagnostic file, but looking around the log, didn't find anything suspicious, one thing I was concern is , if my LSI card is on the right firmware. other then the CRC errors I see another 2 issues that I'm not sure both of them are related 1. very slow parity check, and I guess while running the parity check the CRC count is rising. 2. can't manage to create a new ubuntu VM , its getting stuck while trying to install it. I didn't attach any SMART reports since from my understanding CRC errors are not hard drive specific issue , especially when all of them are getting errors and not just one. let me know if any additional information is necessary. Thanks, Alex. tower-diagnostics-20190127-1822.zip Edited January 28, 2019 by r1sk Quote Link to comment
JorgeB Posted January 27, 2019 Share Posted January 27, 2019 1 hour ago, r1sk said: one thing I was concern is , if my LSI card is on the right firmware. It's not: FWVersion(20.00.00.00) There are known issues with this firmware, you should update to 20.00.07.00, though not likely to fix the CRC errors, if it's not cables/backplane it's likely the controller. 1 Quote Link to comment
r1sk Posted January 28, 2019 Author Share Posted January 28, 2019 thanks!, it actually did the trick. no more CRC errors and the parity check is back to its normal speed. Quote Link to comment
io1901 Posted October 5, 2019 Share Posted October 5, 2019 (edited) I had the same problem, flashed with the 20.00.07.00 firmware and the errors have stopped. Came across this thread after, unfortunately, changing cables and PSU. Edited October 5, 2019 by io1901 typo Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.