techukie Posted March 1, 2019 Share Posted March 1, 2019 I don't know why my parity check is beginning to take 2+ days. Nothing changed, updated, upgraded. Same hardware same software are the previous times. Any help would be be appreciated. Currently running a check, 15 elapsed, 24+ left. Quote Link to comment
JorgeB Posted March 1, 2019 Share Posted March 1, 2019 Start a parity check andplease post the diagnostics: Tools -> Diagnostics Quote Link to comment
techukie Posted March 1, 2019 Author Share Posted March 1, 2019 Thanks. Here you go. Thanks again for the help. unraidserver-diagnostics-20190301-0529.zip Quote Link to comment
JorgeB Posted March 1, 2019 Share Posted March 1, 2019 Nothing jumps out, parity has a failing now attribute, it might be a slow disk, you could try running the disk speed test docker. Quote Link to comment
techukie Posted March 1, 2019 Author Share Posted March 1, 2019 Here are the speed results. The only thing I can think of is that I added about 200gb of data over the past few days, but I don't think that should slow anything down...thanks. Quote Link to comment
JorgeB Posted March 1, 2019 Share Posted March 1, 2019 Parity is clearly not performing well, and since: 4 hours ago, johnnie.black said: parity has a failing now attribute You should just replace it. Quote Link to comment
techukie Posted March 1, 2019 Author Share Posted March 1, 2019 Looking at the speed comparisons between Parity and Disk 1, there's a huge difference. I'll replace the drive. Thanks for all your help!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.