Jump to content
H2O_King89

read errors now a disabled disk

12 posts in this topic Last Reply

Recommended Posts

HBA is constantly resetting:

 

Apr 19 13:31:37 KING-UNRAID kernel: mpt3sas_cm0: fault_state(0x5862)!
Apr 19 13:31:37 KING-UNRAID kernel: mpt3sas_cm0: sending diag reset !!
Apr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: diag reset: SUCCESS
Apr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
Apr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: _base_display_fwpkg_version: complete
Apr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: LSISAS3224: FWVersion(09.00.100.00), ChipRevision(0x01), BiosVersion(13.00.00.00)
Apr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: Protocol=(
Apr 19 13:31:38 KING-UNRAID kernel: Initiator
Apr 19 13:31:38 KING-UNRAID kernel: ,Target
Apr 19 13:31:38 KING-UNRAID kernel: ),
Apr 19 13:31:38 KING-UNRAID kernel: Capabilities=(
Apr 19 13:31:38 KING-UNRAID kernel: TLR
Apr 19 13:31:38 KING-UNRAID kernel: ,EEDP
Apr 19 13:31:38 KING-UNRAID kernel: ,Snapshot Buffer
Apr 19 13:31:38 KING-UNRAID kernel: ,Diag Trace Buffer
Apr 19 13:31:38 KING-UNRAID kernel: ,Task Set Full
Apr 19 13:31:38 KING-UNRAID kernel: ,NCQ
Apr 19 13:31:38 KING-UNRAID kernel: )
Apr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: sending port enable !!
Apr 19 13:31:49 KING-UNRAID kernel: mpt3sas_cm0: port enable: SUCCESS
Apr 19 13:31:49 KING-UNRAID kernel: mpt3sas_cm0: search for end-devices: start

Disk errors look related, make sure HBA is well seated, using latest firmware and adequately cooled, you can also try a different PCIe slot if available.

Share this post


Link to post
HBA is constantly resetting:
 
Apr 19 13:31:37 KING-UNRAID kernel: mpt3sas_cm0: fault_state(0x5862)!Apr 19 13:31:37 KING-UNRAID kernel: mpt3sas_cm0: sending diag reset !!Apr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: diag reset: SUCCESSApr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4kApr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: _base_display_fwpkg_version: completeApr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: LSISAS3224: FWVersion(09.00.100.00), ChipRevision(0x01), BiosVersion(13.00.00.00)Apr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: Protocol=(Apr 19 13:31:38 KING-UNRAID kernel: InitiatorApr 19 13:31:38 KING-UNRAID kernel: ,TargetApr 19 13:31:38 KING-UNRAID kernel: ),Apr 19 13:31:38 KING-UNRAID kernel: Capabilities=(Apr 19 13:31:38 KING-UNRAID kernel: TLRApr 19 13:31:38 KING-UNRAID kernel: ,EEDPApr 19 13:31:38 KING-UNRAID kernel: ,Snapshot BufferApr 19 13:31:38 KING-UNRAID kernel: ,Diag Trace BufferApr 19 13:31:38 KING-UNRAID kernel: ,Task Set FullApr 19 13:31:38 KING-UNRAID kernel: ,NCQApr 19 13:31:38 KING-UNRAID kernel: )Apr 19 13:31:38 KING-UNRAID kernel: mpt3sas_cm0: sending port enable !!Apr 19 13:31:49 KING-UNRAID kernel: mpt3sas_cm0: port enable: SUCCESSApr 19 13:31:49 KING-UNRAID kernel: mpt3sas_cm0: search for end-devices: start

Disk errors look related, make sure HBA is well seated, using latest firmware and adequately cooled, you can also try a different PCIe slot if available.


Thank you. I’ll re-seat it when I get home tonight.


Sent from my iPhone using Tapatalk Pro

Share this post


Link to post

Looks fine so far, not a single error with the HBA, you might also want to update the HBA firmware, since you're using a very old release.

Share this post


Link to post

Broadcom's support site, download the correct package for your HBA, instructions to update are in the zip.

Share this post


Link to post

I think I found it but scared i'm going to mess something up.

It look like I use rufus it make a bootable usb. Then put  mpt3x64.rom , sas3flsh.exe , SAS9305_24i_IT_P.bin on the flash drive. Then boot into the flash drive?

sas3flash -c SAS9305_24i_IT_P.bin -b mpt3x64.rom

I don't want to break my system

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.