davidst95 Posted October 7, 2019 Share Posted October 7, 2019 (edited) Hi, I purchased a Asrock X570M motherboard with a AMD 2700X in Fractal Design Node 804 case. (Plan to upgrade to a new R9 once prices drop) The motherboard has three PCIe slots. With a AMD 2nd Gen CPU installed the motherboard's slots run at PCIe 3.0 16/1/4. In the first slot I have a AMD 580 that I would like to pass through to a Plex server VM. I read a post that the Unraid Plex Docker can only use a NVidia GPU for hardware transcoding. In the third PCIe slot I plan to purchase and install a SATA/SAS controller. I bought a ZOTAC GeForce GT 710 1GB DDR3 PCIE x 1 to put in the second to use as a second GPU but it will not boot with it installed even if I have the AMD 580 installed too. Is this a known issue? From what I read this slot uses the chipset's PCIe lanes. Has anyone tried using with a B450 motherboard's PCIe 2.0 x1 slot with a GPU? I decided to go with the Asrock X570M because the third PCIe slot on a B450 MATX motherboard is only PCIe 2.0 x4. I hope I wrote this question in a way that makes sense. Thanks! David Edited October 7, 2019 by davidst95 Quote Link to comment
mgworek Posted October 11, 2019 Share Posted October 11, 2019 I was just looking at that board. How are you liking it? I want to go smaller but needed 8 sata ports. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.