itlists Posted October 28, 2019 Share Posted October 28, 2019 Hello, I'm running unRaid 6.7.2 Stable. I've noticed a problem with the parity check scheduler not functioning properly. Its currently set to run a check monthly. However, the parity check runs every Sunday morning and I get a report emailed. Its always been running every Sunday even though its set to monthly, so this is not a new problem. Just reporting it now Looking for some help to figure it out... Thanks! Quote Link to comment
Squid Posted October 28, 2019 Share Posted October 28, 2019 Make a change to the schedule, then revert the change and apply. Should be fixed. There was a rc in either 6.6 or 6.7 that messed up the schedule. 1 Quote Link to comment
itlists Posted October 28, 2019 Author Share Posted October 28, 2019 Thanks, I'll try that again. Had done it a couple of times in the past but didn't work. Will know how it goes this weekend Quote Link to comment
itlists Posted November 4, 2019 Author Share Posted November 4, 2019 The parity check was supposed to run on Nov 1, as configured in scheduler, but didn't. Instead, it ran on Sunday, which is the built-in default. So the issue still persists. Quote Link to comment
Squid Posted November 4, 2019 Share Posted November 4, 2019 Can you post a screenshot of your schedule settings, and the output of cat /etc/cron.d/root Quote Link to comment
itlists Posted November 5, 2019 Author Share Posted November 5, 2019 Screenshot below: cron file: # Generated docker monitoring schedule: 10 0 1 * * /usr/local/emhttp/plugins/dynamix.docker.manager/scripts/dockerupdate.php check &> /dev/null # Generated system monitoring schedule: */1 * * * * /usr/local/emhttp/plugins/dynamix/scripts/monitor &> /dev/null # Generated mover schedule: 40 3 * * * /usr/local/sbin/mover &> /dev/null # Generated parity check schedule: 0 2 1 * * /usr/local/sbin/mdcmd check &> /dev/null || : # Generated plugins version check schedule: 10 0 * * 1 /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/plugincheck &> /dev/null # Generated array status check schedule: 20 0 * * 1 /usr/local/emhttp/plugins/dynamix/scripts/statuscheck &> /dev/null # Generated Unraid OS update check schedule: 11 0 1 * * /usr/local/emhttp/plugins/dynamix.plugin.manager/scripts/unraidcheck &> /dev/null Quote Link to comment
Squid Posted November 5, 2019 Share Posted November 5, 2019 Can you post your diagnostics. That should work Quote Link to comment
itlists Posted November 6, 2019 Author Share Posted November 6, 2019 Diagnostics attached. Thanks n3supernas-diagnostics-20191106-2307.zip Quote Link to comment
itlists Posted November 11, 2019 Author Share Posted November 11, 2019 The parity check ran again last night, got an email confirmation Quote Link to comment
Squid Posted November 11, 2019 Share Posted November 11, 2019 I don't know. Personally, I have mine set to Custom and running on the first Saturday of the month to take advantage of lower hydro rates Quote Link to comment
itlists Posted November 11, 2019 Author Share Posted November 11, 2019 4 minutes ago, Squid said: I don't know. Personally, I have mine set to Custom and running on the first Saturday of the month to take advantage of lower hydro rates Yea, mine is similar, once a month but keeps running every Sunday. Quote Link to comment
itlists Posted December 18, 2019 Author Share Posted December 18, 2019 I disabled the parity check in scheduler for a couple of weeks, but it still ran every Sunday LOL!! Not sure what to do... I've enabled it again for Monthly but doubt it will work Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.