Fffrank Posted April 2, 2020 Share Posted April 2, 2020 Upgraded from 6.8.1 to 6.8.3 -- I do know that my parity drive was displayed green and working fine before the upgrade but I can't for sure say it failed after the upgrade. Did the regular upgrade and a reboot and a couple of weeks later logged in to see a message that there was no parity drive in my array. Checked the physical drives and they have not changed/moved (although I did try swapping which bay my parity drive was in to no effect.) Diagnostics attached. hippo-diagnostics-20200402-1152.zip Quote Link to comment
testdasi Posted April 2, 2020 Share Posted April 2, 2020 What do you expect to be your parity drive? At boot, it looks like only 3 HDD were loaded, 2x 4TB Seagate and 1x 1TB WD. Quote Link to comment
JorgeB Posted April 2, 2020 Share Posted April 2, 2020 Disk was never detected, check the LSI BIOS it will also be missing there, and until it appear there it also won't in Unraid. Quote Link to comment
Fffrank Posted April 2, 2020 Author Share Posted April 2, 2020 So weird -- never seen this before. Seems like the drive controller is completely dead. Plugged it into a USB interface that I have and isn't detected on two different laptops. Unfortunately I don't have a desktop to check it on but it doesn't even spin up or blink when plugged in. I'll call it dead and order a new one. Anyone seen a drive die this way with no SMART warnings or errors -- just decides to die? Quote Link to comment
JorgeB Posted April 2, 2020 Share Posted April 2, 2020 1 minute ago, Fffrank said: Anyone seen a drive die this way with no SMART warnings or errors -- just decides to die? Yep, more than once. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.