SolidFyre Posted April 14, 2020 Share Posted April 14, 2020 (edited) Hi, I'm in a bit of a pickle and would really appreciate some assistance. History: During a startup I noticed only about half of the drives accessible in Unraid, the rest were gone. The ones accessible was all of a sudden spitting out loads of read errors. Scared sh*tless I rebooted to see if the drives would recover, turned out the controller card gave up completely instead due to MPT bios corruption. Card: LSI 9201-16i (Firmware P20 - 20.00.07.00) Server has been offline since. Now I have received a new card which I popped in and almost everything seems to be in order, this time I'm running an older firmware though, p19 19.00.00.00. I am afraid to upgrade the firmware this time and is hoping this firmware is perhaps more stable, at least it seems so judging by some forums. Problem: All drives except one turns up green, disk 3. It has a red X saying its disabled and that content is emulated. I have done several smart tests and it says its all good. Running an extended one right now just in case, seems to take a while though. Thought I would do a read check on all drives next? How and what steps should I take in order to add the drive back into the array safely, and should I? The drive seems to be OK. I have 10x10TB where 1 is parity and parity is OK without errors. I have added diagnostics. Thanks in advance. tytan-diagnostics-20200414-2035.zip Edited April 15, 2020 by SolidFyre Quote Link to comment
JorgeB Posted April 15, 2020 Share Posted April 15, 2020 https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive Quote Link to comment
SolidFyre Posted April 15, 2020 Author Share Posted April 15, 2020 47 minutes ago, johnnie.black said: https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive Thank you, it is rebuilding now. ETA 13 hours, fingers crossed Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.