RogerDodger Posted April 19, 2020 Share Posted April 19, 2020 Hi everyone, I'm running a brand new install of unRAID 6.8.3 on my existing hardware, a HP Microserver Gen8 with 2 x 3TB drives around 5 years old. The initial parity check showed 600+ errors. I subsequently ran a correctional parity check which completed earlier and found 347 errors. Should I be concerned? SMART status shows as healthy. I've attached the diagnostics. Thanks! tower-diagnostics-20200419-1130.zip Quote Link to comment
JorgeB Posted April 19, 2020 Share Posted April 19, 2020 Disk1 had a bunch of read errors, it looks like a disk problem, you can run an extended SMART test to confirm. Quote Link to comment
RogerDodger Posted April 19, 2020 Author Share Posted April 19, 2020 Thanks. I've just tried running the extended test and it gives the error "Errors occurred - Check SMART report". Short self-test passes. I've had a look at the SMART report (attached) but I don't really know what I'm looking for. Any ideas? tower-smart-20200419-1007.zip Quote Link to comment
itimpi Posted April 19, 2020 Share Posted April 19, 2020 The part that reads SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 8515 22306624 # 2 Extended offline Completed: read failure 90% 8515 22306624 # 3 Short offline Completed without error 00% 8515 - # 4 Short offline Completed without error 00% 8460 - shows that the disk is failing the extended SMART test and should probably be replaced. Quote Link to comment
RogerDodger Posted April 19, 2020 Author Share Posted April 19, 2020 Thank you very much. Not great news as I am 1000s of miles away from the server but at least I don’t have any important data on there! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.