MadeOfCard Posted April 28, 2020 Share Posted April 28, 2020 This morning I rebooted my server and Unraid didn't want to boot from some boot error (I do not remember or have a screen shot) 1) On a separate USB drive, I used a fresh install to see if Unraid would boot and it was not a hardware issue. It booted just fine. 2) I pulled down my latest USB backup and pushed everything to my active USB drive 3) Booting just fine now but I have a stale config (see attached image) 4) Everything in my `DRIVE_ASSIGNMENTS.txt` is correct. If I reassign everything correctly, it prompts me to choose a new passphase and my parities would be wiped. I'm using xfs-encrypted Halp please 🙏 tower-diagnostics-20200427-2106.zip Quote Link to comment
JorgeB Posted April 28, 2020 Share Posted April 28, 2020 7 hours ago, MadeOfCard said: Everything in my `DRIVE_ASSIGNMENTS.txt` is correct. If I reassign everything correctly, it prompts me to choose a new passphase and my parities would be wiped. I'm using xfs-encrypted If you are sure the assignments are correct just enter the old passphrase twice, then check "parity is already valid" before starting the array. Quote Link to comment
MadeOfCard Posted April 28, 2020 Author Share Posted April 28, 2020 I'll give it a shot and report back, thank you Quote Link to comment
MadeOfCard Posted April 28, 2020 Author Share Posted April 28, 2020 Worked like a champ, thanks again 👍 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.