dglb99 Posted February 3, 2021 Share Posted February 3, 2021 On 11/20/2020 at 8:11 AM, konaboy said: Shows same vainfo output you are getting: https://discordapp.com/channels/623392507828371476/623799920574595092/748901930444783706 And what the fix [probably] is - both my update, and a followon from user ProZach in Discord: https://discordapp.com/channels/623392507828371476/623799920574595092/748901930444783706 Would you mind posting what the suggested fix was? I don't believe we have access to that channel. Quote Link to comment
konaboy Posted February 3, 2021 Share Posted February 3, 2021 20 minutes ago, dglb99 said: Would you mind posting what the suggested fix was? I don't believe we have access to that channel. In my case, what was installed in the docker container was the 'libva-intel-driver' (i965). And for 10th gen processors, what is needed is the 'intel-media-driver' (iHD) for Broadwell and above Intel cores. See this page: https://wiki.archlinux.org/index.php/Hardware_video_acceleration#Configuring_VA-API for reference to the two intel graphics drivers. The suggested fix was to use the intel-media-driver. This is the driver needed: https://github.com/intel/media-driver . I had a tough time figuring out how to get this into a docker container, so I ended up moving over to doing what I wanted on a Windows VM, and built my own ffmpeg.exe with media-autobuild_suite on github. Here's one more link I just found https://www.reddit.com/r/Tdarr/comments/hy7slr/use_i965_hw_encodingdecoding_driver_instead_of_ihd/ It's sort of the opposite of what we need, but it may help in figuring out what to do. Quote Link to comment
LushFire Posted February 6, 2021 Share Posted February 6, 2021 On 2/3/2021 at 12:46 AM, dglb99 said: Just wanted to add another report of /dev/dri showing up but VAAPI not being accessed inside the docker containers with my i5 10400. I plan on trying to get the new intel media-driver working once I get a chance. What is the max temp you see on your chip, passing all 6c/12t to a windows vm running cinebench I see low 50's . I am not sure if my sensor readings are wrong or if something else is going on. Quote Link to comment
dglb99 Posted February 9, 2021 Share Posted February 9, 2021 On 2/6/2021 at 10:04 AM, LushFire said: What is the max temp you see on your chip, passing all 6c/12t to a windows vm running cinebench I see low 50's . I am not sure if my sensor readings are wrong or if something else is going on. I get to the low 60 degrees C under load. Low 50's is fine I wouldn't worry about it. Quote Link to comment
TimV Posted February 22, 2021 Share Posted February 22, 2021 On 6/1/2020 at 1:06 PM, keiser said: Hey folks, just built my first Unraid box with an Intel 10700K, ASUS TUF GAMING Z490-PLUS mobo, 4x WD Elements 8TB, 64 GB RAM (Ballistix Sport LT 16GB x4). I had some issues getting up and running, neither my mobo onboard NIC nor my USB-C ethernet adapter would work. Only way I could get online was with a super old USB-A 2.0 100 Mbps ethernet adapter. Ordered a USB-A gigabit adapter to see if that works. I also have an ethernet card lying around here somewhere and I may just slap that in, too. I hear the onboard NIC may just start working with the new kernel so I'm not terribly worried about it. Drives all came up fine, just had to format them. Got the Unassigned Devices/Plus plugins working, got drives all sorted out, assigned to array, everything functional there. Already transferring data from backup drives. I've tried enabling the onboard iGPU so I can run Plex on Docker. No dice. BIOS is set to use the CPU GFX. Go script: #!/bin/bash # Start the Management Utility /usr/local/sbin/emhttp & modprobe i915 chmod -R 777 /dev/dri syslinux.cfg: default menu.c32 menu title Lime Technology, Inc. prompt 0 timeout 50 label Unraid OS menu default kernel /bzimage append initrd=/bzroot i915.alpha_support=1 label Unraid OS GUI Mode kernel /bzimage append initrd=/bzroot,/bzroot-gui i915.alpha_support=1 label Unraid OS Safe Mode (no plugins, no GUI) kernel /bzimage append initrd=/bzroot unraidsafemode label Unraid OS GUI Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot,/bzroot-gui unraidsafemode label Memtest86+ kernel /memtest Appears to show up, but /dev/dri never appears. root@KeiserUnraid:~# lsmod | grep i915 i915 1351680 0 i2c_algo_bit 16384 1 i915 iosf_mbi 16384 1 i915 drm_kms_helper 135168 1 i915 drm 348160 2 drm_kms_helper,i915 intel_gtt 20480 1 i915 i2c_core 40960 4 drm_kms_helper,i2c_algo_bit,i915,drm video 40960 1 i915 backlight 16384 2 video,i915 root@KeiserUnraid:~# chmod 777 /dev/dri chmod: cannot access '/dev/dri': No such file or directory You got this working? I have same MOBO but with B460 chipset and i had to use 6.9.rc2 for it to recognize my onboard NIC. Quote Link to comment
maverhick Posted February 25, 2021 Share Posted February 25, 2021 I am glad I found this thread. I was going to a new build and was considering the i5-10400 chip. Is there a motherboard that is suggested that would work? Looking to hook up a LSI LBA card to connect 8 drives. Please suggest which mobo/chipset to pick up and unraid support issues that I might encounter Quote Link to comment
tmchow Posted July 28, 2021 Share Posted July 28, 2021 I'm in middle of researching upgrades and found this thread. Wanted to check in now 6+ months later with unraid upgrades amuck to see if this now works without hoop jumping. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.