MixMaster5001 Posted July 19, 2020 Share Posted July 19, 2020 I received a notification that my second parity drive was disabled. It also had a couple of hundred errors in the "Error" column. Parity check last night returned no problems. Finally had a chance to shut down the machine and check the cables. Everything appears fine with those. Restarted the server and the drive continues to show as disabled. I then ran a SMART test and downloaded a diagnostics report, which I have attached. Any help/guidance would be appreciated, thanks! albus-diagnostics-20200719-1402.zip albus-smart-20200719-1349.zip Quote Link to comment
itimpi Posted July 19, 2020 Share Posted July 19, 2020 The drive will continue to show as disabled until you take corrective action as discussed here. Quote Link to comment
MixMaster5001 Posted July 19, 2020 Author Share Posted July 19, 2020 Ok yeah, I thought we were heading in that direction... I'm realizing I should have run the diagnostics prior to restarting everything. Any chance anyone can tell what happened to the drive based on the diagnostics and/or SMART test I attached? Thank you! Quote Link to comment
JorgeB Posted July 20, 2020 Share Posted July 20, 2020 8 hours ago, MixMaster5001 said: Any chance anyone can tell what happened to the drive based on the diagnostics Diags are after rebooting so we can't see what happened but SMART looks fine, most likely not a disk problem, you can replace/swap cables to rule them out in case it happens again. Quote Link to comment
MixMaster5001 Posted July 21, 2020 Author Share Posted July 21, 2020 That makes sense. Thanks everybody! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.